#3  
Old 12-16-2011, 08:29 AM
mtnxtreme800's Avatar
mtnxtreme800
mtnxtreme800 is offline
Senior User
Join Date: Jun 2011
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by dukie1877
your going to want to put that beast back in in one piece. On my 03 there is a small spot it kinda rolls out of just to the left of the oil filter housing there is a video floating around on you tube that kinda makes it look easy. 6.0 Liter Ford Powerstroke - High Pressure Oil Pump & Revised STC Fitting Part 1 - YouTube here is a good one
But you have an F series, so it has no obstructions above with the hood open,
on mine it has the cowl above it, like 2 inches above it, it sucks, actually working from inside the van, it's easier than an F, but when I rolled it like you said to the passenger side, it was good, if it was an F, but then it hits, I had to really drag it accross the cowl, with more force than it should to remove.