thanks for the link. i ran a self test and these are the codes i got
koeo
85 Canister Purge Solenoid circuit failure.
cm
22 MAP/BP sensor out of self test range.
32 EVP circuit has intermittently failed below minimum voltage of 0.24 volts.
95 Fuel pump secondary circuit failure. The EEC senses infinite resistance to ground from the fuel pump on the Fuel Pump Monitor circuit.
codes 22 and 95 im not to worried about because that probably was cause when i was changing the map sensor and when the fuel pump was staying on.
im not sure if the canister purge solenoid circuit is the problem here but if im wrong tell me. any help on what i should do about this evp sensor and circuit failure would be greatly appreciated. thanks