View Single Post
  #4  
Old 10-19-2011, 10:38 PM
sspikaroo's Avatar
sspikaroo
sspikaroo is offline
Freshman User
Join Date: Apr 2009
Location: eastern Montana
Posts: 41
Likes: 0
Received 1 Like on 1 Post
Sounds like it could be a fuel supply issue. Have you checked the fuel pressure at the schrader valve on the injector rail? It should be roughly in the 30 to 40 psi range and increase slightly under load. If it is low and/or falls off under load, there's your trouble. Could then be a bad fuel pump or plugged fuel filter.