View Single Post
  #6  
Old 09-21-2011, 04:45 PM
Bobbys Big Red Rig's Avatar
Bobbys Big Red Rig
Bobbys Big Red Rig is offline
Senior User
Join Date: Aug 2010
Location: Anderson SC
Posts: 299
Likes: 0
Received 1 Like on 1 Post
Originally Posted by BigAlsPSD
It was optional, the only real way to tell is if it has the wiring going to the hubs, rotors should be the same regardless though.
That's good if you didn't buy the truck pre-owned and the previous owner had replaced hubs once before. Hope that came out right. I had the same question. Is there a way to know if you have 2 wheel or 4 wheel ABS? I am the third owner of my truck and second owner had replaced huds once, left a few parts out. He went with the ones with ABS connectors because they were cheaper and in stock, the cut the connectors off. He said he "thought" that was the same way it was when he got it. I went with the hubs without the connectors because I did not notice the way he did the old ones until I got them off.
Is 2 wheel ABS on the front or back?