HGM the only thing that changed that I am aware of is that I completely rebuilt the steering, from the wheels to the steering wheel. I don't think I knocked, messed up or counter adjusted anything, but I don't know I didn't. I looked at the rods and the z bar, and the z bar seems fine even the bushings are in fair shape. I will probably replace anyway, but I don't think that is the issue. I pulled the vertical actuator rod off at both ends, and the top is very worn. I may look for a replacement on that too. I can't help but think that something I did prematurely messed up the pressure plate. I am avoiding pulling the trans to find out the answer. I will let you all know what I find out this week.