Thread
:
Unit bearings
View Single Post
#
2
07-23-2011, 12:08 PM
arto_wa
Tuned
Join Date: Sep 2006
Location: Southwest WA
Posts: 394
Likes: 42
Received 24 Likes on
18 Posts
Wheel studs
The fine thread studs have 1.5 mm pitch, the coarse threads have 2.0 mm pitch.
Just measure the thread pitch to see which ones you have, the difference is obvious.
Reply
Like
arto_wa
View Public Profile
Find all posts by arto_wa