Thread: Duraspark to the GM HEI
View Single Post
  #3  
Old 07-10-2011, 06:19 PM
JimsRebel's Avatar
JimsRebel
JimsRebel is offline
Fleet Mechanic
Join Date: Mar 2008
Location: Washington
Posts: 1,965
Likes: 0
Received 61 Likes on 50 Posts
The white wire input is not needed as the RED wire will have power in both RUN and START
Try swapping the Dist pickup wires to see if it will run at idle, W and G on the 4 pin module.
I think this will fix it.
Jim
 
Reply Like