Thread
:
torque spec on wheel bearings
View Single Post
#
4
06-29-2011, 09:38 PM
reddog99
Laughing Gas
Join Date: Aug 2003
Location: So. Cal.
Posts: 1,168
Likes: 1
Received 7 Likes on
7 Posts
Don't know if your '99 is the same, but for my 2004 the manual says to tighten the axle nut to 21 ft/lbs while rotating the disk. Loosen the nut 175 degrees. Re-tighten the nut to 17 in/lbs while rotating the disk.
Reply
Like
reddog99
View Public Profile
Find all posts by reddog99