Originally Posted by
boones26t
im interested on how you are doing your swap ziegelsteinfaust i dont care for how high they set after the install i want it to set a few inches lower the 5 inches off teh ground would be the ticket!
I will do a write-up after I finish in a couple of weeks.
From I see as I have been going through the install is the way I am doing it is the lowest one can go before you Z the frame. The problem with Z'ing the frame is that where the cut has to be made is right under the middle cab mount. Which practically makes it a no go unless you wanna modify the way the cab mounts.
So the way the I did it with sectioning of the frame to accomodate another 2.5 inch drop is about the only way.
Also I can still drop it 2-3 more inches on the springsfrom what I heard.