View Single Post
  #2  
Old 06-01-2011, 02:47 PM
Tsoptich's Avatar
Tsoptich
Tsoptich is offline
Senior User
Join Date: Oct 2009
Location: Selah
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Since you already replaced everything I would recommend pulling the maste out and doing a good bench bleed only take you about an hour and if need to replace you have half the work done. But if you do replace it bleed it first you can do it yourself with a friend put it in a vise so it's level or take it to a tire service shop we do them for customers for half hour labor about $30. Good luck.