View Single Post
  #2  
Old 05-22-2011, 08:01 AM
fifty-two_f1's Avatar
fifty-two_f1 fifty-two_f1 is offline
Posting Guru
 
Join Date: Mar 2010
Location: alexandria, Indiana
Posts: 1,178
fifty-two_f1 is starting off with a positive reputation.
I also have an 8BA flathead V8 that is complete. I pulled the heads to check for cracks and could not find any. I used 400 grit in between the valves and cylinder walls where they like to crack but did not see anything. It is not stuck. It is standard bore. It had clean oil in it. It came out of a 1950 truck. I have an extra set of heads and an extra crank for it. It needs to go. I also have a 226 flat 6 block and a 215 6 that is stuck. MAKE ME AN OFFER!!!
Reply With Quote