Also, in the DTC code analysis, it says the problem for most of my codes could be a short somewhere, as David Chamberlain said earlier.
It says there is a 'Pinpoint S for 12 way conn. diagnostics'. It says there is a main 12 way wiring harness/connection that delivers power and ground to all of the sensors. The pinpoint test will help find the cause I assume.

For the; P0107- pinpoint test H
P0405 pinpoint W
P0472 pinpoint X
P2285 pinpoint Q
the rest pinpoint AG

I don't know how to do these. I have access to a high quality scanner, a Snapon Mobis Elite, can it do these pinpoint tests?

It looks like I may have to go to a dealership.