Go Back   Ford Truck Enthusiasts Forums > Search Forums
Sign in using an external account
Register Forgot Password?


Showing results 1 to 15 of 500
Search took 0.65 seconds.
Search: Posts Made By: Conanski
Forum: 1987 - 1996 F150 & Larger F-Series Trucks Today, 10:20 PM
Replies: 2
Views: 98
Posted By Conanski
You can swap in a factory tach but you will need...

You can swap in a factory tach but you will need a complete cluster from a '94 or '95 truck with an I6 and you will want to transplant your speedo into the new cluster to retain the trucks milage....
Forum: 1987 - 1996 F150 & Larger F-Series Trucks Today, 10:12 PM
Replies: 9
Views: 108
Posted By Conanski
The GCWR is the number you cannot legally exceed...

The GCWR is the number you cannot legally exceed no matter what, so your maximum trailer weight will be limited by your trucks ready-to-travel curb weight. The reason there is an overlaping range in...
Forum: 1987 - 1996 F150 & Larger F-Series Trucks Today, 07:03 PM
Replies: 1
Views: 110
Posted By Conanski
Yes some play in the rear diff is normal if by...

Yes some play in the rear diff is normal if by that you mean the input will turn back and forth a little with no resistance, it should not move up and down or side to side however and but any play in...
Forum: 1968-2013 Full Size Vans Today, 10:21 AM
Replies: 4
Views: 133
Posted By Conanski
This seems to be a problem with all Fords, I have...

This seems to be a problem with all Fords, I have had to "fix" our Rangers, my old F150, and my new E250 van. The fix is quite simple too.. just put a little arch in the arm to apply a little more...
Forum: 1968-2013 Full Size Vans Yesterday, 10:55 PM
Replies: 51
Views: 673
Posted By Conanski
My concern is not whether it will function or...

My concern is not whether it will function or not.. it will, my concern is if the gearing is suitable for a truck of this size and weight.
I'm assuming the whole reason you are swapping a 351 into...
Forum: 1978 - 1996 Big Bronco Yesterday, 10:40 PM
Replies: 14
Views: 131
Posted By Conanski
And there is the catch.. you can't know what the...

And there is the catch.. you can't know what the engine condition is without removing and inspecting the various components. Crank bearing surfaces don't often go out of shape but the big end of the...
Forum: 1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks Yesterday, 10:23 PM
Replies: 7
Views: 256
Posted By Conanski
You may be pleasantly surprised about what...

You may be pleasantly surprised about what happens to the gas milage, if you do a lot of highway miles you may lose a bit but all you go to do to get that back is swap in a 5-sp trans.
Forum: 1987 - 1996 F150 & Larger F-Series Trucks Yesterday, 07:04 PM
Replies: 2
Views: 184
Posted By Conanski
Share some more info on your truck. Getting...

Share some more info on your truck.
Getting codes is key to solving this issue so that problem will have to be fixed first. Does the check engine light turn on when the key is first turned on? Make...
Forum: 1968-2013 Full Size Vans Yesterday, 06:58 PM
Replies: 51
Views: 673
Posted By Conanski
BTW.. you can find the rear axle gearing by...

BTW.. you can find the rear axle gearing by finding the axle code on the drivers door pillar calibration decal and then cross referencing that with charts found here or in the owners manual, post up...
Forum: 1978 - 1996 Big Bronco Yesterday, 03:53 PM
Replies: 14
Views: 131
Posted By Conanski
No.. and that is besides the fact that it would...

No.. and that is besides the fact that it would be pointless to do so.
Forum: Ranger & B-Series Yesterday, 03:49 PM
Replies: 13
Views: 190
Posted By Conanski
What about a clogged exhaust(melted cat), you...

What about a clogged exhaust(melted cat), you would think that would be fairly obvious but..
Forum: Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W) Yesterday, 01:57 PM
Replies: 22
Views: 429
Posted By Conanski
The 351 block is taller and wider so it requires...

The 351 block is taller and wider so it requires a unique lower intake section, a stock 5.0 intake won't work. Companies that make aftermarket intake system typically offer 2 different lower sections...
Forum: Performance & General Engine Building Yesterday, 01:43 PM
Replies: 3
Views: 75
Posted By Conanski
Edelbrock makes a several different versions, as...

Edelbrock makes a several different versions, as does Trick Flow, and then there are several offshore brands. All of these will outflow the stock intake by quite a bit and all except the Edelbrock...
Forum: 1968-2013 Full Size Vans Yesterday, 01:32 PM
Replies: 51
Views: 673
Posted By Conanski
No.. wrong balance weight.

No.. wrong balance weight.
Forum: Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W) Yesterday, 09:02 AM
Replies: 22
Views: 429
Posted By Conanski
Are you planning to use the stock truck intake?...

Are you planning to use the stock truck intake? If so definitely port match the lower portion to the heads as best you can but don't bother with polishing it actually hurts airflow on the intake...
Showing results 1 to 15 of 500

 
Forum Jump
 

Participate In The Forums

Create new posts and participate in discussions. It's free!

Sign Up »


All times are GMT -5. The time now is 11:21 PM.


Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Advertising - Terms of Use - Privacy Statement - Terms of Service - Jobs
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.

vbulletin Admin Backup