Go Back   Ford Truck Enthusiasts Forums > Search Forums
Sign in using an external account
Register Forgot Password?


Showing results 1 to 15 of 499
Search took 0.34 seconds.
Search: Posts Made By: lhud
Forum: 1999 - 2003 7.3L Power Stroke Diesel 03-03-2015, 07:48 AM
Replies: 14
Views: 358
Posted By lhud
If for some reason you need to get it up and...

If for some reason you need to get it up and running quick go with one of the box stores BUT keep your OEM and have it rebuilt by a local starter/alternator shop, then put the OEM back on and keep...
Forum: 1999 - 2003 7.3L Power Stroke Diesel 01-23-2015, 01:06 PM
Replies: 28
Views: 582
Posted By lhud
If it continues to loose coolant check real close...

If it continues to loose coolant check real close the connections going inlet/outlet of the heater core. I finally detected a small leak at those plastic clips on the core inlet/outlet.

Good luck,
Forum: 1999 - 2003 7.3L Power Stroke Diesel 01-05-2015, 12:54 PM
Replies: 5
Views: 231
Posted By lhud
I have read that you can test the hydro boost...

I have read that you can test the hydro boost operation by pushing the brake pedal down and holding it there with the engine off, then crank the engine and if the brake pedal comes back up with your...
Forum: 1999 - 2003 7.3L Power Stroke Diesel 11-20-2014, 08:01 AM
Replies: 2
Views: 281
Posted By lhud
POWER STEERING HOSE

While on a trip to Texas this past weekend my high pressure hose on the power steering pump blew out at the pump. Of course it was not a hard fix except this is the second time for it to happen.
As...
Forum: 1999 - 2003 7.3L Power Stroke Diesel 10-21-2014, 07:35 AM
Replies: 8
Views: 383
Posted By lhud
Could be your ICP sensor leaking or possibly the...

Could be your ICP sensor leaking or possibly the forward head of the oil cooler - it is that time of the year for the coolers to start leaking.
Or, could the PS pump be spraying some oil onto the...
Forum: 1999 - 2003 7.3L Power Stroke Diesel 10-13-2014, 08:41 PM
Replies: 15
Views: 505
Posted By lhud
First try using a strong magnet along side the...

First try using a strong magnet along side the tube and slide the magnet up until you can get a pair of needle nose pliers on the end. Mine broke off at the T-handle and i was able to pry it out...
Forum: 1999 - 2003 7.3L Power Stroke Diesel 10-03-2014, 01:01 PM
Replies: 17
Views: 842
Posted By lhud
Go to a junkyard and pick up an OEM and have it...

Go to a junkyard and pick up an OEM and have it rebuilt.
Forum: 1999 - 2003 7.3L Power Stroke Diesel 10-03-2014, 07:56 AM
Replies: 4
Views: 364
Posted By lhud
I am fixing to install those Spyntec spindles...

I am fixing to install those Spyntec spindles soon. I wish I had done this a long time ago. If you can afford it and if you need the sealed bearings it might be a good mod to do now and not wait. ...
Forum: 1999 - 2003 7.3L Power Stroke Diesel 09-30-2014, 07:39 AM
Replies: 13
Views: 395
Posted By lhud
My OEM UVCH came loose and after replacing both...

My OEM UVCH came loose and after replacing both sides along with the main engine harness I included the $.50 mod. So, I would say yes that the '02s can come loose.
Forum: 1999 - 2003 7.3L Power Stroke Diesel 09-29-2014, 08:45 PM
Replies: 52
Views: 5,371
Posted By lhud
I use an Edge Engine Monitor and when the truck...

I use an Edge Engine Monitor and when the truck has reached operating temps I can double my IAT reading which is close to my TFT, then add approx. 40 to 60 degrees to it and that will be a good...
Forum: 1999 - 2003 7.3L Power Stroke Diesel 09-23-2014, 09:17 PM
Replies: 12
Views: 388
Posted By lhud
Hey guys, Just got back in town. And I...

Hey guys,
Just got back in town. And I completely forgot about my previous post until you reminded me. The mounting bolt has obviously done well up until recently. I am looking at some work in...
Forum: 1999 - 2003 7.3L Power Stroke Diesel 09-22-2014, 08:05 PM
Replies: 12
Views: 388
Posted By lhud
CPS MOUNTING HOLE???

O.K. Have any of the brothers encountered the following?
A while back I removed my CPS sensor bolt to change my sensor. Well, I noticed something odd looking against the bolt head. Further...
Forum: 1999 - 2003 7.3L Power Stroke Diesel 09-08-2014, 07:55 AM
Replies: 18
Views: 1,166
Posted By lhud
I too tried one of the "Denso" knock-offs and it...

I too tried one of the "Denso" knock-offs and it did not last long. I then dug deep and bought a real Denso made in Japan - $400+/-. If it does not have stickers indicating it was made in Japan it...
Forum: 1999 - 2003 7.3L Power Stroke Diesel 08-24-2014, 09:53 AM
Replies: 20
Views: 757
Posted By lhud
Firefighter, I normally use the Rotella T6 and...

Firefighter,
I normally use the Rotella T6 and it would turn black in a couple of thousand miles. Recently I used the Delo 400LE and it would stay honey colored to my next oil change. However,...
Forum: 1999 - 2003 7.3L Power Stroke Diesel 07-20-2014, 12:15 PM
Replies: 6
Views: 361
Posted By lhud
Chevron 400 LE Oil

OK, I have been running the Rotella T6 for some time with good oil analysis. However, after approx. 2k to 3k the oil starts turning black - not like the honey colored when installed.
Recently I...
Showing results 1 to 15 of 499

 
Forum Jump
 

Participate In The Forums

Create new posts and participate in discussions. It's free!

Sign Up »


All times are GMT -5. The time now is 11:32 AM.


Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Advertising - Terms of Use - Privacy Statement - Jobs
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.

vbulletin Admin Backup