October Chat/ All Topic Thread
3 Attachment(s)
Since it looks like our leader is dragging his feet, I'll start this one :-X10
Spent the weekend at my place on the river, had a lot of fun. Cooked steaks on the grill, think I have hooked another lady on my cooking :9 The high winds last night knocked down a dead tree, damage could have been worse. Oh, and picked up my (new to me) Harley Fri, I think it's gonna be a blast |
Thanks for reminding me it's about time to start cutting wood. I need about 3 or 4 ricks to heat the shop this winter.
Nice lookin' bike, I love the flames, but I'm bettin' the new lady will absolutly hate that seat. We got about 120 miles in on the bike yesterday. Up to Fifty-Six, then Hwy 341(Push Mtn Road) to Norfork and then 5 back to Mtn View. Stopped and ate at Don Quixote's in Calico Rock...great as always. Got home and put the crank sensor on the Crown Vic(what idiot put that SOB under the a/c compressor?). Damned if the thing didn't start right up, run about 10 min and run out of gas right where it's sitting. Oh, and Ash_Flat...that F500 we were talking about is between Calico Rock and the prison on Hwy 5. Still sitting there waiting on a new owner. |
Wally, the lady is not the only one who hates the seat, it's about as hard as a brick. Been looking on E-bay, didn't realize what a seat costs :-roll The front tire is in need of replacement and the speedo drive, but otherwise, I can find nothing wrong. According to KBB, I bought the bike for almost $2K below book value.
|
Originally Posted by mechmagcn
(Post 9399060)
Since it looks like our leader is dragging his feet, I'll start this one :-X10
Is it October already? Nice bike Jeff, now.. it's time to start looking for you one of those shirts... |
Originally Posted by tojoski
(Post 9400660)
Woops, :-innocent
Is it October already? Hey Wally, since we're talking seats and you're a bigger guy like me, what would you reccomend. I never thought that there would be so many choices out there :-X15:confused::confused::confused::confused: A few more shots of the bike can be seen here. http://picasaweb.google.com/mechmagc...eat=directlink Never was much on flame jobs, but the chamelion effects sort of grow on you. |
Whatchu tryin' to say, Willis? :-X0A6
Personally, I'm a Mustang guy. I kinda like this for your bike: Wide Touring Vintage Solo - Harley-Davidson Softail 75757 | Mustang Motorcycle Seats They make it in a one piece and with studs and conchos if you like that kinda stuff(the one I have for my bike has both). There is also a narrower version, but...well, you know. I didn't think I was gonna like the flames when we were talking about them, but now that I've seen the pics, I've got to say I like 'em a bunch and I bet the pics don't do them justice. Oh, and Dunlop Elite 3's for the tires. Last longer and handle better than the stock Dunlop 402's the bike came with. |
Originally Posted by Old_Crow
(Post 9401713)
Whatchu tryin' to say, Willis? :-X0A6
Looking at E-bay, there's a Wide Super Touring One-Piece Studded Seat - Harley-Davidson Softail 75503 | Mustang Motorcycle Seats for $369.99 with free shipping. Think I'm gonna bite the bullet and buy it. Motorcycle lift should be here tomorrow, other parts from JP later this week, maybe a good ride this coming weekend:-D Oh and the flames, I didn't like em when I first looked at the bike, was dark and just a carport light, but in the sun they look great. |
If you're gonna buy tires online, I usually check 4 sites for prices as they can have sales at different times. Dennis Kirk, Jake Wilson, American Motorcycle Tire and Southwest Moto Tire.
For parts I usually use Jirehcycles.com and for a resource such as FTE this site is good: HarleyTechTalk - Index |
Good morning FTE peps!
Have a great day! :) |
Thanks Wally, I was all excited when I thought it was a crew cab, not terribly interested in it being a reg cab but I will get over there just to see it. Supposed to go to Jonathons this weekend to get my bed with the toolbox door in the right side. Detroit finally showed up last week, gotta get it cleaned up, replace some gaskets etc... Anybody know about Med duty trannys? It came with a Spicer cm 5052 4 cant find anywhere the specs, wonder if its direct drive in 5th? surely is
|
Anybody else going to the air show this weekend?
We'll be there Saturday. |
Lynn and I were supposed to ride the bike down there with my bro in law Sat, but I've got to work at the restoration shop. Sunday we'll be doing last minute stuff for War Eagle the next weekend.
Supposed to be a good show this year. |
Yeah, it's October already...Thanksgiving will be here soon; followed by Christmas. Can't wait to battle the lines and idiots trying to fill Santa's list.
Originally Posted by tojoski
(Post 9410484)
Anybody else going to the air show this weekend?
We'll be there Saturday. |
Good Morning Arkansas! :)
Happy Columbus Day! :D For all of those that are off, have fun, and those that aren't, still have fun! |
1 Attachment(s)
Thanks Wally! This seat is Much Mo Better!!!!!!
Rode yesterday for about 50 miles, thought my rear would never be the same, new seat just came in, put it on and rode about 5 miles, I LOVE IT!!!! |
yup, now all you're needing is a sissy bar and some saddle bags, I see you've already got the passenger pegs.
I had to work Sat and spent Sunday working on my generator and otherwise gathering stuff to go to War Eagle. I gotta put a back tire on the bike before we go anywhere, it's gettin' kind of thin in the middle. Prolly get it done about the time the weather gets bad. |
Good Morning AR! :)
Hope you all have a great day! :D Nice looking bike Jeff! |
Originally Posted by Old_Crow
(Post 9429394)
yup, now all you're needing is a sissy bar and some saddle bags, I see you've already got the passenger pegs.
|
Don't know what the acronym is for Ford trucks, but Harley-Davidson=HD=Hundred Dollars. I once walked out of Rodney's in LR having spent only $2.87. My all time record. Usually it's like $287.00
|
Originally Posted by Old_Crow
(Post 9430494)
Don't know what the acronym is for Ford trucks, but Harley-Davidson=HD=Hundred Dollars. I once walked out of Rodney's in LR having spent only $2.87. My all time record. Usually it's like $287.00
|
precisely why the newest one we own is my wife's '87 bagger. Her Superglide is an '85 and my bagger is an '82.
I spend a lot of time in the shop, but that's fun to me too. |
Yep, Hundred Dollar is about right. Went to Bossier HD last week, walked out with a jacket, gloves and a docking kit for the sissy bar, spent around $250. I wouldn't buy a new HD, wouldn't want one. In looking for a bike, I suspect a lot of folks don't want the newer ones either, most for sale are 2000 and later, seldom older.
Missed a set of saddle bags on e-bay today, went for more than I wanted to pay, still have a bid on a sissy bar though, we'll see how that goes. Zack, too bad you work on Sat. there's a great car show at Wilberton, OK this weekend, I'll be there. Average around 475-500 vehicles every year. |
Going anywhere near War Eagle to get there? I've got the trailer all loaded except for food and all our display stuff packed. We'll probably head north around 9 this morning and be back home late Sunday night.
We have our stall in the group of tents on the mill side of the creek. Depression glass wind chimes are what my wife sells. Take your ladies to the craft fair and stop by and say "Hi". |
Good Morning AR! :)
Happy Hump Day! :D |
Sorry Wally, if I didn't have plans I'd swing by that way. Headed out to Ardmore, OK to visit in-laws for a few days after the show.
|
Morning everybody...I'd forgotten about what's like to have two days off back to back. Think I'm going to wash the Pavement Princess today, poor thing hasn't had a bath since June...two days before I hit the buck. Shame on me.
Originally Posted by mechmagcn
(Post 9432454)
I wouldn't buy a new HD, wouldn't want one. In looking for a bike, I suspect a lot of folks don't want the newer ones either, most for sale are 2000 and later, seldom older.
Originally Posted by mechmagcn
(Post 9432454)
Zack, too bad you work on Sat. there's a great car show at Wilberton, OK this weekend, I'll be there. Average around 475-500 vehicles every year.
Originally Posted by Old_Crow
(Post 9433663)
Going anywhere near War Eagle to get there? Take your ladies to the craft fair and stop by and say "Hi".
Originally Posted by mechmagcn
(Post 9433805)
Sorry Wally, if I didn't have plans I'd swing by that way. Headed out to Ardmore, OK to visit in-laws for a few days after the show.
|
Well, made it home, had my shower and getting ready for some shuteye. We had our best weekend ever saleswise and it was a blast.
The truck pulled the camper to War Eagle with no problems and I thought I was gonna be the oldest rig there again. Til I saw some guy from Mo with a '51 F1 pulling a 4x8 homebuilt teardrop. Trailer had a For Sale sign, and when I stopped to check it out, he wanted $4800. Nice trailer, but not $4800 worth(at least not to me). |
Good Morning AR! :)
|
Good Morning AR! :)
Happy Hump Day! :D |
Man this thread has been quite for the last couple of days. Sad part is some guy from 'Jersey has been keeping it alive. We love you Steve, just not in the long showers into the wee hours of the morning type of love.:-X05 I have to admit this new schedule at work is different, but my wife seems to be happy with it. So I don't complain. Guess Jeff is still on the road in Okieland...poor guy. Everyone else must be working on their Halloween customs. I think I'm going to dress up as a large volume cargo relocation specialist.
|
Just doing my part and dropping by every once in awhile to say Hey! You guys usually have some pretty good BS going here and always a welcoming group! I feel the same way Zack, it's a family kinda love!...LOL
|
Originally Posted by zhilton
(Post 9460577)
Guess Jeff is still on the road in Okieland...poor guy.
Zack, I'll let you know this weekend if I can make it next week. |
Speaking of "large volume cargo relocation specialist"
Last year I dressed up in something similar to this: http://www.drinkstuff.com/productimg/36058.jpg Not surprisingly, you stay pretty cool in there with the inflator going. |
I'm still trying to recover from our weekend at War Eagle. I haven't been sleeping well since we got home. Last night the wife suggested I go sleep in the trailer because I wasn't having any trouble sleeping up there.
|
Good Morning AR! :)
Is it Friday Yet! :D |
Morning everyone, got some fresh brewed Folgers if interested. Heck, I'll even supply the sugar, cream & cup. FOB Ft. Smith through.
Originally Posted by sddesigns
(Post 9460634)
Just doing my part and dropping by every once in awhile to say Hey! You guys usually have some pretty good BS going here and always a welcoming group! I feel the same way Zack, it's a family kinda love!...LOL
Originally Posted by mechmagcn
(Post 9461940)
Nope, just got home. Didn't want to come back, but have to work a few days so I can take off again :-X05 I've got a teardrop gathering starting the 28th and thinking about heading to New Hampshire for Thanksgiving :)
Originally Posted by tojoski
(Post 9464285)
Speaking of "large volume cargo relocation specialist" Last year I dressed up in something similar to this:
http://www.drinkstuff.com/productimg/36058.jpg
Originally Posted by sddesigns
(Post 9464380)
Good Morning AR! :)
Is it Friday Yet! :D |
Originally Posted by zhilton
(Post 9464844)
Are you going to take the teardrop or puppy dog to NH?
|
Originally Posted by mechmagcn
(Post 9465506)
More than likely the teardrop. I'm living in the 5th wheel right now, too much to pack down for a trip. 1600 miles each way, better get my rear end ready for some seat time.
1600 miles each way...holy smokes steering wheel holder, that's a trip. The most I've ever done was 1100 miles (FSM to Clare, MI) when we went to see family and it wasn't exactly in one sitting. Too many complainers in the peanut gallery needing potty breaks before the truck burned through a tank of liquid dinosaurs. I would like to get a 90 gallon fuel tank in place of the in bed toolbox (that I've used twice in 3 years) so that when we make a road trip with the trailer I can go more than 2 & 1/2 hours between fuel stops. Can't make any money...err time with the left door open.x( The Pavement Princess is easy on the fuel...until you drop the travel trailer on the hitch...then you can literally watch the fuel gauge needle fall. Pretty sure I'm going to get shot down :-X01:-X01:-X01(3 to 1 odds) when I try it...but I'm going to try anyway. |
At the moment still living in the 5th wheel at Mt. Holly, hope to finish the place at the 'Bay this winter and then move in. Won't take long to have it where I can stay, just finish the bathroom walls and ceiling, then I can stack the washer/dryer combo, hard to stay without laundry facilities.
It's a fine afternoon, think I'll take the bike for a run to town :-dancing1 |
Yeah, yeah, go ahead and torture me. Ours has been sitting for 3 weeks needing a back tire(which I also have sitting there). Haven't had the time to put it on.
Last night I came home, fixed my compressor and then took the back wheels off the Crown Vic to see which brake pads I need(2 options, based on the material of the caliper piston), tonight I get to finish the brake job so that yet another of my grown children can borrow the thing. I've had that car over 2 years, it's had 8000 miles put on it and I've driven it to town a couple of times and once to Little Rock. |
All times are GMT -5. The time now is 04:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands