I need a grille insert and dash bezel (with a/c) 1978

Scratch that last post. Got what I need.

Looking for an air cleaner assembly for a 4bbl carb.
just shopping for prices for now.

How about a exhaust manifold plenum heater valve for my F150 300\6 of 78 vintage? And tan door panels too, maybe... the PO made wooden ones that do the job but, you know. I get a lot of grief bout em! And you wouldn't have the top bracket to hold on to the heat shroud for the intake heat pipe? That'd be awesome if you do! 54896

Do you have door panels that look like the ones below? they have the wood grain trim. Also how much for your NOS grill shells and inserts?
Lastly, do you have rear left springs for a 78 f-250 4x4

https://cimg0.ibsrv.net/gimg/www.for...388154bb59.jpg

Any gas pedals for a 78 f250 4x4?

Looking for grille and grille surround for 78/79

I am looking for left and right interior plastic door panels red, ash tray, two good retractable seat belts, and the actual box for the glove box space (I have the door and hinges)

Sorry everyone, I've been a little slow with responses lately. Lets see if we can catch up a little.
Jeff

Sorry on the radio bracket. I have mostly NOS bearings and switches. PM me if you still need one.
Jeff

No air cleaners at all.
Sorry.
Jeff

Might have tan door panels but why not just buy some and spray them. Prob be cheaper than shipping these. Nothing here for sixes.
Jeff

No on those door panels. Lots of water damaged ones around here. No too on the springs. PM me if your serious about a NOS grill.
Jeff

I have one used one left.
Jeff

I have a glove box and prob an ash try. Have to look at the seat belts. Door panels as prev posted.
Jeff