|
|
yup I got the ebay one for the dash. It's the console cup holders that seem to be mysterious.
http://www.ebay.com/itm/170885745286?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT |
Originally Posted by CharlyG
(Post 16627894)
yup I got the ebay one for the dash. It's the console cup holders that seem to be mysterious.
https://www.amazon.com/Genuine-Ford-...ole+cup+holder |
It's the rear one I need. The one I ordered doesn't fit, it's too big.
|
I think the light bar instead of the big halogens really cleans up the look of your front end. Nice job
|
Originally Posted by AlaskanEx
(Post 16627816)
This morning another 3 moose got killed, it's that time of year!
https://www.youtube.com/watch?v=hJmIwb_AWPY Well, I decided to ditch the metal light bar with 4 halogen lights and I put in the new economy line of Rigid LED light bars, decided on a 20" with white backlight. Bolted up SUPER easy just drilling two holes. Tested it out tonight and I'm impressed, since I pay wayyy below retail for these things it was hard to pass up plus its getting dark here quickly. Also installed clear corners which really cleaned up the front. I'm just not into the 05-07 lights call me crazy. Next will be installing the snow plow mount, wiring and Rigid DOT fog lights in mounted flush with the 2011 lower valance plastic. |
Originally Posted by CharlyG
(Post 16627894)
yup I got the ebay one for the dash. It's the console cup holders that seem to be mysterious.
99 00 01 Super Duty F250 F350 F450 F550 Ford Dash Cup Holder Parchment Tan | eBay |
the holders are made of stiff plastic, are a little deeper, and actually hold a cup. My original was some odd/strange gizmo that couldn't hold an empty paper cup..kinda like the front console(not holding a cup). I can't speak for the back of the console as mine is missing and I now have the newer rear cup holder that doesn't fit...
|
Well stuck in bed because I did too much yesterday and wore my ankle out :( I did do this though ;)
https://cimg2.ibsrv.net/gimg/www.for...92c3795a35.png https://cimg3.ibsrv.net/gimg/www.for...60ab6e6be8.png |
1 Attachment(s)
|
1 Attachment(s)
And if you didn't own an Excursion you probably prepared by securing your car like this...
Attachment 161408 |
Originally Posted by Apocalypse
(Post 16628615)
Well stuck in bed because I did too much yesterday and wore my ankle out :( I did do this though ;)
https://cimg3.ibsrv.net/gimg/www.for...60ab6e6be8.png |
2 Attachment(s)
Originally Posted by az_r2d1
(Post 16628323)
Nice clean install. How is the light output of that bar? How far, if any, do they throw light?
Low beams only Attachment 213121 High beams with Rigid light bar Attachment 213122 |
Originally Posted by AlaskanEx
(Post 16628786)
It's pretty good, I'm not sure I have the aiming exactly where I want it yet but here are some photos from this morning. I took a video but our WIFI is down at work so I can't upload it from my phone right now.
Low beams only http://i57.photobucket.com/albums/g2...psfctv9uuf.jpg High beams with Rigid light bar http://i57.photobucket.com/albums/g2...pstlphcbdp.jpg |
Originally Posted by LivingLarge
(Post 16628719)
After all the hype............... :-X19 |
Originally Posted by IMASAP
(Post 16628871)
After all the hype............... :-X19
|
| All times are GMT -5. The time now is 04:11 AM. |
|
© 2024 MH Sub I, LLC dba Internet Brands