|
Originally Posted by LeviD
(Post 17175774)
It wasn't all done today but the last week. Wheels and tires last week. Lift over the weekend and I know you can't tell but rear sliding window replaced with solid and passenger window that was broke replaced today!
|
Originally Posted by SlikWillie
(Post 17171062)
Tell us about that radiator.
|
Originally Posted by kansas storm 350
(Post 17171289)
I wasn't too excited about it since it has plastic tanks on it, but my original one was beyond repair. I got it from Advance Auto with an online discount, so I gave it a try. So far I like it, the plastic is much heavier/thicker than my Magnum Hemi radiator. It was an exact bolt in and fit perfectly.
|
where can a guy get running boards like those
|
After my back yard paint job, I've been wet sanding all the orange peel. One panel at a time.
https://cimg2.ibsrv.net/gimg/www.for...9733ce66bd.jpg https://cimg6.ibsrv.net/gimg/www.for...0194d682f9.jpg |
Ya, wet sanding sure is fun isn,t it.But well worth the time. Looks great.
|
To be honest, it was yerterday but I replaced the radiator hoses, thermostat and cap. This was due to the 'stat sticking closed, causing the upper hose to go puunt!
On the plus side, it had been 6 months since the last time I had to call AAA. Michael |
Originally Posted by ktm4012
(Post 17181301)
After my back yard paint job, I've been wet sanding all the orange peel. One panel at a time.
https://cimg2.ibsrv.net/gimg/www.for...9733ce66bd.jpg https://cimg6.ibsrv.net/gimg/www.for...0194d682f9.jpg |
Got the motor back from the machine shop
|
Gave Mine a much needed bath then went to grab a bite to eat
https://cimg1.ibsrv.net/gimg/www.for...4a38932854.jpg where I had the opportunity to chat with the owner of this little gem https://cimg2.ibsrv.net/gimg/www.for...c219fd5ed4.jpg https://cimg3.ibsrv.net/gimg/www.for...4b8fc7acc8.jpg |
Currently accepting parts orders for my truck and dreaming of the day that it's up and running again.
With the girlfriend on her way back home, she's excited to give me a hand wrenching on the F250. Can't wait to reassemble and awaken the beast! |
I had a valve tap on my 76 F100 so my neighbor and I took my valve covers off and assessed the problem. Turns out it was a clogged valve stem. We sprayed it with carb. cleaner and the oil started to come through, good as new, I hope.
|
LEDs
https://cimg7.ibsrv.net/gimg/www.for...6eba626924.jpg
I finally did it. I replaced all the lights on the truck with LEDs and the results are amazing. I even replaced the lamps in the dash with LEDs and it's never looked better (At night anyway). Was going to pull the U-Joints this weekend and get the Driveshaft balanced but the new U-Joints they didn't arrive in time so I went drinking instead. |
Got the new engine running, carb set, timing set, core returned and warrenty activated. Good day to have a Ford.
https://cimg6.ibsrv.net/gimg/www.for...1831d86d9a.jpg |
Originally Posted by BeauF0RD
(Post 17192051)
I had a valve tap on my 76 F100 so my neighbor and I took my valve covers off and assessed the problem. Turns out it was a clogged valve stem. We sprayed it with carb. cleaner and the oil started to come through, good as new, I hope.
|
| All times are GMT -5. The time now is 08:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands