|
Originally Posted by lasermike
(Post 17004610)
Spent my birthday installing 2 freeze plugs, changing the oil and wipers. Considering I spent my last birthday wondering if the chemo and radiation were going to work, I'd say it was a pretty good day. And I had cake! And pizza!
Michael
Originally Posted by NM76F150
(Post 17004954)
Can you give a reference for the bulbs?
And it looks like you have good taste in beer. https://cimg8.ibsrv.net/gimg/www.for...af80ca2fb.jpeg Thanks! Stone has discontinued my favorite brew, so I'm holding auditions for a new favorite: https://cimg9.ibsrv.net/gimg/www.for...5d398adf3d.jpg |
I haven't been working on the truck yet since I am still trying to finish my Mustang project but I did pull the steering wheel today so I could swap it and a few bucks for a much better one.
|
Lil things
Knocking out little things while I wait for the correct modulator for the tranny.... Put on inspection plate for the C6.... removed all wiring from the PO's trailer brake controller and installed new brake light switch and I now have brake lights ! Took out silly bucket seats, prepping for the bench seat install this coming weekend...... Oh and got 4 foot of vacuum hose for the incoming modulator........
|
1 Attachment(s)
The Dent gets a little love.
|
Herculiner
Put roll on Herculiner on my f100.
|
Did a tune-up since the weather is getting warmer
|
Removed aftermarket AC stuff that was under the hood (inside the dash is next), replaced battery terminals, fixed bushings on both doors and in the process of fixing hood latch.
|
https://cimg6.ibsrv.net/gimg/www.for...10d51b1c99.jpg
New hinge pins, bushings, and door striker bolts. After installing these on both sides and getting everything readjusted, it is an enormous difference. Can't believe I waited this long to do it. |
Who did you get the kit from? Part #? Please.
|
Originally Posted by 77&79F250
(Post 17010188)
Who did you get the kit from? Part #? Please.
I had bought a set of cheaper ones and they felt really light to me. These are higher, but they seem to be stainless steel. This truck is my DD. I didn't want to take a chance on the flimsy ones so I took them back to the O'reilly's and bought these. Figured I'd at least try them out. So far I'm extremely pleased. |
https://cimg5.ibsrv.net/gimg/www.for...7bb7bbf089.jpg
Taught the kiddo how to check resistance on an ignition coil. 2ndary is busted. Bummer, but maybe she'll start now! |
Originally Posted by cheeriup
(Post 17013191)
https://cimg5.ibsrv.net/gimg/www.for...7bb7bbf089.jpg
Taught the kiddo how to check resistance on an ignition coil. 2ndary is busted. Bummer, but maybe she'll start now! |
So nothing on the truck But I got my FTE sticker in the mail and put it on my box at work
https://cimg0.ibsrv.net/gimg/www.for...7ffe9c9c07.jpg |
Drove ol blue to work this am.
|
Originally Posted by Lds79ford
(Post 17019971)
So nothing on the truck But I got my FTE sticker in the mail and put it on my box at work
Never Mind, I was looking at that huge Ford decal with the red white and blue! Unk Bob:-huh |
| All times are GMT -5. The time now is 09:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands