Originally Posted by 77&79F250
(Post 15971289)
Ford truck bed for a parts paint stand...That is ironic. lol
|
Not a problem, I do a lot of different things and have learned the hard way and I only want to help.
|
I really appreciate it. Anything I can learn before doing any more work, the better.
|
Originally Posted by mountain dewd
(Post 15971308)
It is all I got! Sad story, it was the original bed and was rust free, but the stupid POs cut the fenders up and put those nasty fender flares over the awful cuts. I straightened the cuts, but eventually replaced the fenders on all 4 corners. See picture. Therefore, It will become either a trailer, continue to be a paint stand, or sell it to a rock crawler who wants a super cheap sed of cut fenders and a bed.
|
Seems to have been the case with mine. Thankfully I found a bed and fenders cheap enough to not set me back too far.
|
2 Attachment(s)
Took ol silver for a fast lap, worked on ol blues carb issue. Got tired of flipping the step stool, so I went and grabbed a shorty table. It works great!
Sold some truck parts to a fellow FTE member that stopped buy, and took both Bronco's for a back 40 lap. |
Put on the grip tires since finally have a little snow on the ground...
http://i8.photobucket.com/albums/a6/...124_072952.jpg New front rotors, calipers, brake hoses, and pads... http://i8.photobucket.com/albums/a6/...123_081238.jpg And a new master cylinder... next week the rear brakes get rebuilt! http://i8.photobucket.com/albums/a6/...123_065739.jpg |
a little bit more shiny stuff.
Aluminum diff cover:-X22 https://cimg5.ibsrv.net/gimg/www.for...5a92884bd8.jpg https://cimg6.ibsrv.net/gimg/www.for...fcb103650c.jpg https://cimg4.ibsrv.net/gimg/www.for...34fb75e905.jpg |
|
Drove her to church, much more fun to drive with properly functioning brakes!
Ordered some sound deadener and a new headliner to quiet the interior a bit. |
Wired tail section, routed front section wires.
|
Originally Posted by mountain dewd
(Post 16000182)
Wired tail section, routed front section wires.
I'm on a 48 hour shift today and tomorrow. Hope to get the dash and ignition done Tuesday. What harness are you using? |
Nothing...
I left home a week ago for a two week shift, got on site and was informed I needed to stay for six weeks... Only five more weeks to go. |
Started ol silver because it going on a road trip tomorrow, to get a new windshield!
|
I'm glad it's raining, but I can't go skiing or work on my truck
|
All times are GMT -5. The time now is 04:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands