Dagenham 4-speed for Econoline
I happen to have a Daganham 4-speed transmission, Flywheel, steering column (4 speed on the column) and linkage for an early Econoline. I originally intended to put it into a '62 Econoline Pickup I was restoring but the the truck was destroyed in a fire before I got around to it.
All equipment is unrestored, but I personally pulled it out of an Econoline which was roadworthy and being driven until the day it went to the wrecking yard. Is there any interest in something like this? Pete |
My Dad had one in his old '62 Econoline back in the '70's. I can tell you this much, when he swapped out the original 3spd for the 4 spd, it made a HUGE difference in making the most out of the 170's power. Anyone who has an old Econoline should jump on this setup, of course I don't know what parts availability is like since they are quite rare.
|
I have one in a parts van with a running 170 engine. Plan to install in my 64 Truck when I get to restoring it.
|
PGR,
How much you want for it? |
Hello,Do you still have the 4 speed set up?...What are you asking for it?
Norm |
Dagenham
Is your "kit" still available??
|
I NEED a Dagenham ASAP. I have a '63 Falcon Club Wagon that I'd love to put back on the road. Anyone have one?........... Don 419.574.3185
|
econoline 4sp
yes in interested in the 4sp set up for my econoline I have a 200 ci in it with a 3sp please let me know if it's still avl>>>>> thanks
|
yes i am , do you still have the 4sp ?
|
that guy only made one post back in 09 and has not logged on since.
|
I have a 200ci in the van with 3sp iv'e already made a floor shifter set-up that has been in the van for 35yrs & never had a problem , so converting to 4sp l not a problem , the only problem is finding one ! there pretty rare > thanks
|
DAGENHAM 4 ON TREE TRANSMISSION- I HAVE ONE
Originally Posted by Rollen
(Post 16124694)
yes i am , do you still have the 4sp ?
|
All times are GMT -5. The time now is 02:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands