Coolant Filter Installed!
Yes I did it myself. It's not because I couldn't get any help since Chris offered to come down to do it.
It took me 3 hours to do it and I quite pleased with the outcome. Here's the details: 1 hr to read, and re-read the directions and study the pictures.(2 full pages) 15 min. to install the filter housing. 15 min. to install the values and hoses on the fillter housing. 1 1/2 hrs to get up enough nerve to cut the hoses on the SD and install the T's.:-X22 And the results are in: http://i119.photobucket.com/albums/o...s/100_2103.jpg http://i119.photobucket.com/albums/o...s/100_2104.jpg http://i119.photobucket.com/albums/o...s/100_2106.jpg http://i119.photobucket.com/albums/o...s/100_2107.jpg http://i119.photobucket.com/albums/o...s/100_2108.jpg http://i119.photobucket.com/albums/o...s/100_2109.jpg A normal F'er can do the job in under an hour with a lunch break. lol |
a fine looking job George :)
|
Thanks Jr, I hope it works like Bud describe it would.
|
hmm I thought Chris was the one promoting these ? :confused:
|
He was but Bud already has one installed.
|
Looks good George, quality workmanship :-X22
|
Thanks Brian, that means a lot coming from a master mechanic like you. :)
I think I need to remove and clean out the coolant reservoir, it looked kinda nasty, like there could be come sand from the casting in there. |
Nice work George. The photos are good also. How often do you change the filters?
|
I think from what I have read, that you should change the filters about every 3,000 miles or sooner until you get most of the sand out of the system. Then maybe once a year there after.
Have to read up on that part again. :) |
Looks Good George, I'll be getting one soon
|
Originally Posted by glruff
(Post 8072336)
Thanks Brian, that means a lot coming from a master mechanic like you. :)
I think I need to remove and clean out the coolant reservoir, it looked kinda nasty, like there could be come sand from the casting in there. |
Good job there George and congrats on getting the nerve to cut the hoses :)
|
Thanks Neil, trust me I was sweatin bullets with the razor knife in my hand. lol
|
All times are GMT -5. The time now is 08:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands