Doors
I don't need doors ,but can use some floor pans and a possi rearend.
|
Anyone know where I can get a drivers side rear hub for a 97 F-350?
|
Wtb, $$$, 351m
$$$$ for good 351M windsor low miles for my 78 f-150 4x4. i live in Concrete WA. don't want to travel to far.
|
wtb $$$ brush guard or grill gaurd
$$$$ for chrome grill guard for 94 explorer, eddie bauer.
|
292 cu.in.Y block
I have a 292 cu.in.Y block out of a 1959 F100 that I would like to go to a good home.The numbers for this engine are C2AE 6015 C which works out to be a the V8 used in 1962 cars 62-64 trucks.
I bought the truck for parts last summer and drove onto and off the trailor we moved it with and to the store and back a couple times. It ran well. It has a 2-barrel Holley with manual choke, bell housing, flywheel and clutch, generator w/regulator and front engine mount. I already have another engine rebuilt and mounted for this project but I needed a good bed and misc frame brackets so I bought this truck for parts. It's here in Seattle on a pallet where I work so if you are close and want it send me a PM and we will make a time. Cyrus _____________________ Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in sideways, thoroughly used, totally worn out and loudly proclaiming... HELL YEAH!!! What a ride! |
Looking for a Proportioning Valve
According to Les Schwab my Brake Proportioning Valve on my 79 F-150 2WD has gone bad and I need another ASAP. They are having a hard time finding one. Anybody have one or know a place I can go to get one local??
|
I need a fan shroud stamped D3TA-CA
it's for a 79 F-150 302 2wd auto with a/c i need one bad |
93-97 Ford Ranger Driver side mirror Cheap.
I have a driverside Ford ranger side view mirror for sale. It came off of my (Now gone) 96 Ranger. It is a good replacement for someone that may have busted the glass, needs replacement mirror glass, or just needs one cause theirs was busted off.
It's used and is missing a little of the edge trim, I am asking $5 for it. If I have to ship it I am going to have to ask for $8 to ship it. I can most likely meet up if it isn't too far. I live in Silverdale. Here are some pics. http://farm3.static.flickr.com/2669/...912bb1a7b0.jpg http://farm3.static.flickr.com/2526/...3121c2.jpg?v=0 http://farm4.static.flickr.com/3445/...c69f82.jpg?v=0 http://farm4.static.flickr.com/3088/...1006ea.jpg?v=0 I just need to get rid of the extra stuff I have around. |
1976 crew cab
I have a 1976 f250 2wd crew cab forsale. $800 in Spokane
http://i124.photobucket.com/albums/p...8766932000.jpg http://i124.photobucket.com/albums/p...8766894000.jpg http://i124.photobucket.com/albums/p...8766876000.jpg |
WTB: "CD-6" Stereo head unit
WTB: I need a CD-6 head unit to put in my Excurison. I found out tthe hard way that not all CD-6 are the same so I need one out of a vehicle that has the DVD/VHS rear entertainment system.
I think the part # on my previous radio was 3C7T-18C815-AB PM or email me. I need it pronto |
I want a Dana 44 solid axle out of a '77-'79 F150 or Bronco (with coild springs). I want to try to get it as complete as I can hub-to-hub, caliper-to-caliper, radius arms blah blah blah. PM me if you've got one. Preferably eastern washington, as I'm in La Grande right now and it'd be a looooong drive otherwise.
|
Canopy from my 1985 ford f250 diesel, regular bed. Comes with all functional glass intact and good condition. It is missing the access door and has a small outer crack (doesnt leak as its superficial) on the roof but its nice and cheap $100 on the Eastside of Seattle... its brown :-X06
|
Need money, 1969 F-250 for sale
Hey all, I am unemployed and need some money fast so the "Old One" is up for sale.
It has sat for about 6 months and needs an alternator to run(alternator has a bad rectifier and is chrome plated:-X22). It has a 390 2bbl, C6 auto, new front springs and round gauge panel from a 77 medium duty Ford. Has a Dana 60 rear w/3.73 gears and limited slip. Also has 16 in. rims(I got rid of the 16.5 in. ones) and a 16.5 in. spare. $300 or best offer. Please don't beat me up too bad on the price we really need the money. Also can throw in an Edlebrock intake for it.:-X22 I am offering it on FTE for the next two days then it goes on craigslist if it doesn't go. https://www.ford-trucks.com/user_gal...id=168591&.jpg https://www.ford-trucks.com/user_gal...id=168593&.jpg |
69 f-250
How is the body and is the bed solid and not cracked or rotted out? I need it for my 69 high-boy. Thanks Sean
|
Originally Posted by Catman3500
(Post 8370632)
How is the body and is the bed solid and not cracked or rotted out? I need it for my 69 high-boy. Thanks Sean
|
All times are GMT -5. The time now is 10:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands