need 52 f1 box dimensions pleease
Please help me asap I am building the whole box out of wood and lost my measurements of the finished size of my 52 f1 box mostly I need the width exact finished size I am close to completion sides a re solid quartersawn white oak with jatoba inserts with qs oak rails and stiles a solid qs oak tailgate nlayed wenge and lots done to finish setup of floor i need the finished outside width so my fenders sit in the corect position help would be greatly appreciated:-drink
|
woody, please put some more pics of the purple f1 in your gallary, that sure is a nice looking truck, thanks in advance Garry
|
I was messing around with avatars when i found this one its not mine but it sure is hot eh
|
1 Attachment(s)
Here's the chart from the Dealer's Handbook. Stu
|
8Dwhat info i need is the crossmember locations but thanx for this info its very helpful
|
HI Woody,
There's tons of info on the dimensions on a number of sites and here on FTE. The first one I came up on is from "Earls World." I'll post the link, and if you scroll about 2/3 of the way down you will see his dimensional drawings on the bed boards. There are dimensions for wood to cross member hole drilling dimensions there - those are the dimensions for your cross member centers. Here's the link. If you need more let me know. I have quite a few references..also check out Mar-k who advertises here. MAR-K Catalog http://www.clubfte.com/users/earl/Re..._Material.html Good luck Julie PS Well here, I'll post a picture from "Earls World" as well....excellent site...recommend it to all! http://www.clubfte.com/users/earl/Re...odDrawings.jpg |
All times are GMT -5. The time now is 06:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands