It Fired up
 

Well here is my rebuilt engine it fired up today but still has some timibg issues and only one injury.:-missingt


http://i150.photobucket.com/albums/s...h_100_0704.jpg http://i150.photobucket.com/albums/s...h_100_0703.jpg http://i150.photobucket.com/albums/s...h_100_0702.jpg http://i150.photobucket.com/albums/s...h_100_0701.jpg http://i150.photobucket.com/albums/s...h_100_0700.jpg

Hey that's a start Cliff.

BTW, I can click on pic to get a larger image, goody joby

Thanks George I couldn't have done it without your help on the pictures

Neat Cliff.....now go treat that wound! What size drill bit was in the drill?

3/16 bit. :-banghead

Told you it will work out.

Thanks Dave,so far it has.

Video
 

Here is a video of my truck today another friend came over to help with the timing. That little bit of smoke you see is where I spilled oil on the exhaust manifolds.

Video of Engine_Run_45_sec - Photobucket - Video and Image Hosting

Saweeeeeeeet Cliff, thanks for sharing!

Thanks George I got excited and posted in a few threads.