Originally Posted by Imondi
(Post 6261655)
Well, I ran through the numbers last night and I need a gear ratio of nearly 6:1 to get back to stock gearing. So now, I have a decision to make. Do I spend the money to re-gear this thing the way it is, or do I save up my money and do Rockwells. I also want to do rear-steer at some point in the next year, which would once again require a different set-up. I am having a hard time deciding what to do here!
i think you might be coming on to somthing here..... |
Originally Posted by miker67
(Post 6261904)
Check out usa6x6.com for info regarding rockwells. Their axle prices are steep, but they have a lot of good parts that you can use to rebuild a donor axle if you can find one cheap somewhere else. .
DO WHAT????? no no NO!!!!!! for cheaper replacement parts check out: OD Iron LLC Military Vehicle Parts and Accessories Truck Fabrication Military Drivelines 2.5 Ton 5 Ton Axles Parts red river parts hard to find stuff: memphis equipment boyce equipment after market parts: ouverson engineering, chucks trucks, screamin seamin brackets: ballistic, btf, sniperfab wheels: stazworks, long's wheel |
Originally Posted by STGFordCrazy04
(Post 6262126)
DO NOT BUY ANYTHING FROM usa6x6.com unless you have an earnest desire to be ripped off screwed over and left beside the road dead.
they stopped with the rockwell aspect and went with their original 6x6 conversions |
:-bigparty:-X25 .............
|
sharp truck, I just have to ask how do you or for that matter the woman in the picture get in or out of it?
|
Originally Posted by krewat
(Post 6262741)
Yeah, this IS GOING to be started up again, if STG keeps talking like he doesn't understand REALITY.
The only bashing I saw came from minions, and MAYBE one other person. Who bashed? The only two warnings/infractions I gave out were for STG and one of his minions. Do the math. hahahaha |
Originally Posted by STGFordCrazy04
(Post 6262420)
I think USA6x6 is bankrupt anyway so I dont see why it matters.
Originally Posted by quadzjr
they dont exist anymore, they have gone out of business.....
they stopped with the rockwell aspect and went with their original 6x6 conversions Removed by moderator |
Thanks for the advice. I have heard bad things about USA 6x6 as well. Do you know if they have any kind of adapters to fit the 8-lug wheels that are on the truck now? I really like that look!
I agree with the safety. That is why I used the last of my student loans to get rid of the unsafe tires! haha As for getting in the truck, you just grab the door, step on the tire, and hause yourself in! Of course, all the girls that get into the truck get a little boost!:-jammin I have designed some electric steps and I plan to order remote actuators to run them in the next couple weeks. |
Originally Posted by Imondi
(Post 6263602)
Thanks for the advice. I have heard bad things about USA 6x6 as well. Do you know if they have any kind of adapters to fit the 8-lug wheels that are on the truck now? I really like that look!
I agree with the safety. That is why I used the last of my student loans to get rid of the unsafe tires! haha As for getting in the truck, you just grab the door, step on the tire, and hause yourself in! Of course, all the girls that get into the truck get a little boost!:-jammin I have designed some electric steps and I plan to order remote actuators to run them in the next couple weeks. check them out: ouversonengineering - NEW SUPER 8 |
|
Originally Posted by quadzjr
(Post 6265174)
ouverson engineering makes 8 lug hubs for them......
check them out: ouversonengineering - NEW SUPER 8
Originally Posted by quadzjr
(Post 6265217)
|
Originally Posted by Imondi
(Post 6263602)
As for getting in the truck, you just grab the door, step on the tire, and haul yourself in! Of course, all the girls that get into the truck get a little boost!:-jammin
One of the advantages of a big truck is little ladies that need a boost, AND STILL want to ride HIGH! (Shucks, it isn't perversion if any normal man thinks about it all the time... Or at least once every five minutes according to a national survey) The guys who DON'T think about it worry me... *winkezzz* |
wow....
I have lost ALOT of respect for some members of this forum. I will keep the names to my self. But some of the things that were said. I am completely amazed. Just WOW! As for the rocks. I think its a good idea. 6.72:1 i belive is the ratio. |
Dude if you know anything about 4 wheeling a 32inch lift is only for show! Thats whats called a Trailer Queen, or a Disco Truck!:-drink
|
you upgrade the brakes yet?
|
All times are GMT -5. The time now is 08:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands