Archived MI Buy/Sell/Trade Ads
 

<><><><><><><><><><>Buying ,Tradin and Selling Thread><><>><><><><><><>

Guidelines to help keep things from turning into a flea market.

Please post your ads in this thread only.

Only Ford truck related items can be listed here.


You must have your P/M {private messaging} turned on and be able to recieve P/M's ....(go to user cp in the above blue bar to do this.

Please Do Not use this thread to discuss anything regarding the Items.

Use the P/M or E-mails systems to conduct discussion & commerce.

You can post that you are interested in the items and that you'll be contacting them, just please keep it short.

If you post a wanted/for item please reply back that it is sold or that you have found the wanted item.
I will from time to time clean up this thread of old postings.30/60 days.


NOTE:
You need to be a active member of the Michigan chapter or a active member in another state to post a wanted or for sale item.
No Exceptions

If you are not a member and/or are a new FTE member(15 days or less).
You must private message the chapter leader for permission before posting .


*** Your post or reply to any post is subject to being edited, or deleted at admin's discretion, or violation of FTE guidelines.***

Archived MI Buy/Sell/Trade Ads,,, https://www.ford-trucks.com/forums/7...trade-ads.html

Archived MI Buy/Sell/Trade Ads
 

1. 1987 Mustang LX hatchback rolling chassis, no motor
2. C6 trans, around 5,000 miles since rebuild, shift kit, rebuilt converter
3. C4 trans, around 30,000 miles since rebuild, shift kit, rebuilt converter
4. 94-95 Mustang intake
5. 2 sets of 8 19# injectors, cleaned and working fine
6. computer from '93 F150 4x4, auto, 5.0
7. clutch fans, Mustang and F150
8. 1-2 year old A/C condensor from '92-96 F-series, looks new, clean
9. 4.9/5.0/5.8 flex plates for E or F-series
10. 1984 Bronco II XLT parts(very clean)

• mint front and rear bumpers
• swinging spare tire carier(hardware and all)
• 7.5" rear axle, 3.08
• dana 28 front, 3.08
• C5 4wd trans
• transfer case
• 2.8 v6, 90,000 runs

If I think of more, I'll add it. I have lots of little odds and ends from '92-96 F-series and '86-93 Mustangs.

Parting out a 1969 F100 a lot of good parts
Truck came from Oklahoma

engine block above is gone, but the heads are still available. send me an email or pm.

looking for a driver's side cloth Super Duty floor mat... grey, with floor shift tcase.

For Sale UPDATE!!!
 

Updated version.

1. C6 trans 2wd, for small block, around 5,000 miles since rebuild, shift kit, rebuilt converter
2. 94-95 Mustang intake
3. computer from '93 F150 4x4, auto, 5.0
4. 1-2 year old A/C condensor from '92-96 F-series, looks new, clean
5. 4.9/5.0/5.8 flex plates for E or F-series
6. 1984 Bronco II XLT parts(very clean)

• Body, nearly rust free, roof damage, whole or parts Pics of '84 B-II
• 7.5" rear axle, 3.08
• dana 28 front, 3.08
• transfer case
• 2.8 v6, 90,000 runs

If I think of more, I'll add it. I have lots of little odds and ends from '92-96 F-series. I will trade for 5.0 performance parts, off-road tires/rims, and Mustang body parts and accessories.

License Plates- Buy, Sell, or Trade- any years, any states,
Looking for a specific year just ask i have many plates. Don't just throw away those old plates, I take any plate.
Lplatejohn@yahoo.com

Lookin for 4 barrel intake and headers for a 360-390 v-8.

intake
 

I have a factory 4bbl intake $20 + ship if intrested good thing your in mich as shipping would be a killer across state lines due to weight issues.

Sky jacker lift kit for sale
 

2005- newer F-350 8.5" lift system for sale .
Skyjacker coil springs up front with 4 link and rear leaf springs

1999 F350, DRW Lariat, V10 auto 4X4(6?), crew cab, auto trans, 183K miles, Drawtite hide a goose hitch, brake controller, Snoway 108" predator snow plow. Just bought a 08 superduty and need to sell the 99. I've had 4 trucks that I've plowed with and this one is by far the best. 1000 lbs in the bed and with the 6 tires, it really moves the snow. Did not plow commercially, just my own driveway, my business's small parking lot and our church's lot. Have a 1997 Maclander flatbed gooseneck trailer that I would sell with it. email me if you are interested.

Wanted!!!!!

Split Bench from a 80-96
Must be from a Bronco or a F-Series Ext cab.

Want to put it in my Bronco so I have an extra front seat!

Thanks Scott.

Give Easy Russes auto salvage a call or vist them in Grand Rapids he has a bronco in the yard with the split front seat setup in the yrs your looking for hes off of pannell rd. off of Alpine Ave 1 blk south of Ann ST.

Western Uni Mount Plow
 

I have a Western Unimount, 7'6" Pro Plow, I bought it used from a freind in Indianapolis, he only use it on his drive. I have only use it on my drive. All of the brackets and wiring is there for a 99-2004 Superduty. Everything works like it is supposed to on this plow. I bought a MVP plow for my truck and don't need 2 plows. Asking $1800, but I am open to offers.

Rich

Plow, SOLD!!

Toyman