Archived Oregon Buy/Sell/Trade ADs
Chapter Buy/Sell/Trade Ads: Each chapter will have one (1) thread for chapter members to list items wanted, for sale or for trade. The rules for posting in this thread are as follows:
Archived ADs can be found here,,, https://www.ford-trucks.com/forums/7...trade-ads.html |
Archived Oregon Buy/Sell/Trade ADs
Thanks Rich :-X22
|
OK all,
I'll be in the market for some body parts at some point. It's not super high on my priority list, getting her on the road is first. My truck has been hit pretty hard in the front. Lots of bondo there now. I'll be needing both front fenders and a hood at some point. The dually fenders are pretty beat up too. I found a set on CraigsList for $180 but I'd rather throw that money at mechanical first so I'm sure they'll be gone by the time I get ready for them. I'll keep an eye on this thread for items wanted as well. I check CraigsList on probably an hourly basis looking for parts so I may find a link for someotherbody too. Mike '93 F350, 4x2, CC, DRW, NA 7.3, E4OD, 4:10. |
Fabman,
Here's one for you: http://portland.craigslist.org/clc/pts/278642939.html Not sure if that's exactly what you're looking for or not, but it's probably close. Mike |
Originally Posted by Oregon-Mike
Fabman,
Here's one for you: http://portland.craigslist.org/clc/pts/278642939.html Not sure if that's exactly what you're looking for or not, but it's probably close. Mike It has a C-6 auto now, and we want to change over to a manuel trans for better milage, He drives it 265 miles every day! |
Fabman (and whomever else is interested),
Here's another on Portland's CL: http://portland.craigslist.org/nco/pts/276151575.html One's got the manual tranny, could probably get all the parts you & your son need from that one. Mike |
Originally Posted by Oregon-Mike
Fabman (and whomever else is interested),
Here's another on Portland's CL: http://portland.craigslist.org/nco/pts/276151575.html One's got the manual tranny, could probably get all the parts you & your son need from that one. Mike |
No prob Fab, I'll keep looking for you. I have RSS feeds set up for all of Oregon's CraigsList sites searching for parts for my truck. It doesn't take me any more time to look for 5 speed parts for you too and I'm happy to do it.
Mike |
Need a Tow truck?
Don't need my old tow truck anymore, anybody need one?
"75" Ford F-350, Weld-Built wrecker body: https://i51.photobucket.com/albums/f...Wrecker005.jpg Need more pics? Just PM me. $2,500 |
93 f250
4x4, 460, supercab, long box. just lifted with the 35" BFG's tranny just gone through , added tranny cooler, temp guage. Put new torque converter in. 125,000 on it. nice truck. pm or email me for details and pics rayjc@wbcable.net
7500 obo |
I'm looking for a an Autolite 2150 carb to rebuild..
one for an AT trans if possible. Thanks; Webster
|
Edge Juice w/ Attitude Monitor
Selling an Edge Juice for 01-03 7.3l Powerstroke. Will include an a-pillar mount and windshield mount that goes above the rear view mirror.
Comes with the pyrometer probe. Still works like new, looking into puchasing a different tuner. If interested, email white.todd@comcast.net. More info can also be found on Edge Diesel's site at www.edgeproducts.com Thank you for looking. |
Hey guys. This looks like a good deal to me. I can't use it but maybe one of you can:
http://portland.craigslist.org/mlt/car/357825053.html |
I have a set of 92-96 F150/Bronco factory non-rivet wheels, caps and 31" tires for sale. These will fit 1/2 ton trucks and fullsize broncos 96 and earlier. They have 4x4 center caps for the front and the rear caps have black centers.
I also have a set of 94-98 Mustang GT 5 spoke 16" wheels with mismatched tires available |
I have a 1968 Ford F-250 for sale.
here are the specs. 1968 Ford F-250, Red - 360 C.I. V8 - NP435 4 speed transmission - Dana 60 rear end; geared 3.73:1 - New water pump - Recent tune-up - New alternator - New steering column bearings and rag joint - Rebuilt brake master cylinder - New fluids - Overload coil springs in the back - Front and rear 2” receiver hitches - Period correct interior - Runs and drives great, Lots of power - Original ford 1968 specific vehile manuals, all three volumes - Completely stock, no add-ons, or modifications to detract from original condition. - Great base for restoration, or just drive as it is - Asking $1,650.00 Personally, I'd like to see this truck go to a caring owner, so I'm posting it here first. If anyone has any other questions about it, PM me. Oh, and if anyone has a late 40's or early 50's Ford or Mercury coupe project or something i could make into a project layin around, let me know! |
All times are GMT -5. The time now is 03:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands