Archived NY Buy/Sell/Trade Ads
 

[Chapter Buy/Sell/Trade Ads: Each chapter will have one (1) thread for chapter members to list items wanted, for sale or for trade. The rules for posting in this thread are as follows:

• Only Ford truck related items and automotive tools & equipment can be listed.
• Only one picture is allowed per post, per item. If additonal pictures are necessary, place a link in your post to those pictures. Additional posted pictures will be removed without warning.
• You must have your private messaging (PM) turned on and be able to receive PM's to post an ad in the Chapter thread. If you do not, your post will be removed.
• Use the PM or email system to conduct all discussion and transactions regarding the item(s). You can post your interest in the item(s) and that you’ll contact the seller but no discussions. Keep it short.
• If you post an ad, please reply that you found, sold or otherwise disposed of the item.
• The buy/sell/trade thread will be purged periodically for old postings. Generally every 30 to 60 days.
• You need to be an active Chapter Member on FTE to post a wanted, for sale or for trade item(s). No Exceptions.
• You must have permission from the Chapter Leader or a Regional Moderator to post an ad in a chapter that you are not a member of.
• If you are new to FTE (less than 15 days) or have less than 25 posts, you must contact the Chapter Leader for permission before posting an ad.
• Your ad or reply to any ad is subject to editing or deletion at discretion of the Chapter Leader, Moderators or Administrators of FTE.
• Commercial advertisements are strictly prohibited.

Archived NY Buy/Sell/Trade ADs,,, https://www.ford-trucks.com/forums/7...trade-ads.html

Archived NY Buy/Sell/Trade Ads
 

I have a 55 gallon fuel transfer tank for sale. It is a steel square tank purchased from tractor supply about 6 months ago. It's like new. It has a 2in inlet and vent. $150.00
I wont ship it but could possibly deliver it. I live in Newfane north of Lockport.

I have a 67 (67-72) 8 ft box I brought up from Virginia for $300/ offer no tailgate, trim or tail lights. In Trumansburg about 10 miles N of Ithaca. Still on the parts truck. Also 2000 8 ft box no tailgate, tail lights with bed linner $400.

WTB: HOOD and TAILGATE preferably in RED


Fitament is supposed to be as follows:

97-03 F-250/F-150/ excursion (For the hood, i think the tailgate is same)


Agan prefeably in RED but i could take another color.


Willing to drive to pick it up,

Email price and location:

bradleyjpyle@yahoo.com

Wanted!!!!!!!!!!! 17.5 x 5.25 8 bolt wheels.
These were used on 1957 thru 1967 F-250's
My understanding is that they were also used on some Dodge trucks

Bench Seat
 

Hey everyone. I've been off for awhile, had alot of other projects to handle. But I'm back so you'll all be hearing alot from me seeing as how I got alot of questions and even more crazy ideas for my 93' Ranger. Right now I'm in the market for a bench seat to replace the 50/50 seating. I was wondering if anyone might wanna get rid of theirs or trade for mine. Also does anyone know if the newer model bench seats will mount to my 93'?

Hey fast frank - do you still have that muffler?

anyone need a 1961 Ford service manual for series 100-900 series trucks $35 plus ride

67-72 box above is gone. Still have the 2000, reduced to $250. Also brought back from VA a drivers door for a 66. No glass, not mint but, not bad either $25

I am selling a set of stock 18" aluminum ford king ranch wheels and continental tires with 36k miles on them. Currently on ebay but if a member here wants them for $500 before the auction ends, let me know.....

Also, a friend is selling his brand new 8' box from his 2006 F-350 as he installed a utility body....its metallic dark green and he wants $1300 for it, including tailgate....wheels can be picked up in NJ zip 07504 or upstate NY 12835, and the bed is in Delanson NY west of Albany.

Two FE 390's worth of parts.

Disassembled.

One is the motor from my '74 highboy - 11:1 390, 292/292adv cam, complete balanced rotating assembly in a shortblock that has a cracked water jacket behind the flywheel, otherwise, perfect. TRW flat-top forged pistons, reconned rods (rebushed small end) etc. etc.

C8AE-H heads from above 390, CJ-size stainless exhaust valves, all new seats (intake and exhaust), double valve-springs, positive-lock seals, bronze-silicon guides. Very minor pitting on the exhaust valve stems probably due to stock rockers, need a cleanup by a machinist. Ported and polished by my machinist.

Second 390 block, completely stock, C7AE heads (8-bolt exhaust) w/stainless valves, and what looks like exhaust seats already done. Very clean. Crank, block, 2bbl intake, everything looks rebuildable. Disassembled.

Make an offer on any one or all parts, located in Lindenhurst, NY, on Long Island. About 10 minutes from the Nassau/Suffolk border.

Thanks ;)

selling truck
 

hey im selling my 69 ford f 100 pics in profile starting to build a new one

2004 and up WHEELS (RIMS) FX4
 

I m selling my FX4 rims its 6x135mm and i want to get rid of it asap!!

No TIRES

$375 to your door in NY only!!!

Reason sell: upgraded to new wheels/tires

Thanks!
YOMAN!

WTB: Turbo and all the goodies to mount it up to a '90 F-350 7.3 IDI (either factory take-off or used Banks, ATS, etc.).

I spun a bearing on the truck back in October while trailing my race car to Watkins Glen. The motor had 312,000 miles on it when she blew. I also just bought a '32 Haulmark gooseneck trailer for next season.

My mechanic buddy is going to help me rebuild the motor this winter, and since a newer truck isn't in the cards for a while, I thought of adding a turbo to this truck and wanted to see if there was a truck being parted out somewhere out there?

Thanks everyone.

JagerRacer
Saratoga Springs, NY

i need a passenger side door for 69 ford if you have one call 607 898 2006