DJM I beams
Mine has the load leaf removed only and has I6. I just ordered the DJM beams. I have the easy ride setup. could I just flip the front hanger and should I trim the front coil any. Im planning on doing the beams this week.https://cimg1.ibsrv.net/gimg/www.for...be784dbc2d.jpg
|
https://cimg4.ibsrv.net/gimg/www.for...65a3ba5fc9.jpg
DJM Beams, 1 coil cut and Djm Shackle and hanger kit https://cimg8.ibsrv.net/gimg/www.for...c2f6603612.jpg |
|
2 Attachment(s)
|
that looks GOOOD
|
5oh nice truck. What wheels are you running, and are you using crown Vic front with 8.8 rear or something else? Nice color as well.
|
Originally Posted by blue04.5
(Post 14625612)
5oh nice truck. What wheels are you running, and are you using crown Vic front with 8.8 rear or something else? Nice color as well.
|
|
size
Originally Posted by coupe5oh
(Post 14624820)
http://i1179.photobucket.com/albums/...9BAA08244B.jpg
http://i1179.photobucket.com/albums/...4C21C0F2_1.jpg |
wheels
|
Originally Posted by fcatoem9
(Post 14624444)
https://cimg4.ibsrv.net/gimg/www.for...65a3ba5fc9.jpg
DJM Beams, 1 coil cut and Djm Shackle and hanger kit https://cimg8.ibsrv.net/gimg/www.for...c2f6603612.jpg |
1slow5o, if you scroll up like 3 posts he says what size the rims are.
|
my white 72
My white 72 has Shelby CS69 rims 8.5 x 20 and 10 x 20 rears. Nitto 420s tires 255/40 x 20 and 285/40 x 20 rears the truck has been lowered 7-8 inches using a fatman fab front end and T bird IRS rear. I'm in the process of reworking the inner fenders as they hit when the front suspension bottoms out, should have they installed in a few weeks.
|
|
3 Attachment(s)
This is just before I took the cab and front end to the painter. The front will be about 1/2 inch lower and the back should be level with it so about 1.5 inches lower or so.
Attachment 198451 Attachment 198452 Attachment 198453 |
All times are GMT -5. The time now is 10:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands