66 Ford
 

I got my 66 F350 home a little over a week ago.It has a 352 with a 4 speed trans.It runs good.Drove it up the road last week and i like it.It has 88,000 orginal miles on it.Steel flatbed.Been doing a little work on the bed and got some of it repainted.Order some new lights for the bed waiting for them to get here.Just thought I would let you guys know.Tony

good deal , I had a 66 F-100 with a 352 thats a stout engine but a bear to find parts for I have a few parts around I'll have to dig them up and let you know what all I have :-X22

Thanks Mako.There is pics of it my Album if you want to see it.

looks good, scwidvicios got a set of fenders that were in excelent shape at the fall autofair for like 450.00 you should go there this may to see what all parts you can get cheap they are there to be had

Mako did you every look to see what parts you had?Let em know what you have.Tony

I looked and apparently my dad got tired of all my stuff laying in his barn since I got married and moved out. all I could find were the parts and pieces of my old 65 mustang , the bigger ones " engine, trans,headers stuff like that". sorry I couldn't help but I'll ask my pop when he gets back in town maybe he knows where all that stuff went.

Huh??
 

Why would a 352 engine be any harder than a 360/390 to get parts for? Engine parts are the same except for crank, rods, pistons and rings.

Main and rod bearings, valves, lifters, gasket sets, waterpumps, fuel pumps, distributor parts, spark plugs, carbs (2V)...etc are the same.

My guess is your parts store may not list the 352...?

not the stock parts , performace parts. and yes your right very few parts houses show the 352 at least around here I don't know about the S*%! hole called california

think i have 2 352's down at dads.

Well I got the new tail lights in and hooked up.So I took it down the road to the gas station to put some gas in it.Still need to rebuild the carb.And finish the bed.I already got tags and ins on it.Just thought I would let you guys know.Later Tony

Great Tony.

Put up two pics of what I have done on it.Pics are in my album.Let me know what you all think

nice job Tony, looks great.

^^^ What he said ^^^^ :-headbang

Yesterday I went and pick up a set of fenders and a grill and a complete rearend for my 66.Today i went to pull a part and got a set of hood hinges and front clearence light and some other part that I need.I also got a hood for my 71 and got my dad a set of grill inserts for his truck.Still need a few part then I will take the front sheet meatl off and replace it.