Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)

- Colorado Chapter (https://www.ford-trucks.com/forums/forum81/)

- - Diesel shop (https://www.ford-trucks.com/forums/356823-diesel-shop.html)

DeesO

03-18-2005 12:19 AM

Diesel shop

Does anyone know of a good shop somewhere near C-Springs, or somewhere in CO where I can take my 04 F-250 with a 6.0 to have the manifold taped for an EGT probe? Thanks

DeesO

Ablack

03-21-2005 06:50 PM

Show up here and I can tap it for you. http://host226.ipowerweb.com/~colora...6b370adead0aed

ceetwarrior

03-24-2005 12:15 PM

Deeso, my buddy just opened up his Diesel shop here in the Springs. I bet he can do it for ya. Lemme know if your interested.

DeesO

03-29-2005 08:03 PM

Quote:

Originally Posted by ceetwarrior

Deeso, my buddy just opened up his Diesel shop here in the Springs. I bet he can do it for ya. Lemme know if your interested.

Is he ford certified? Its still under warranty, and I don't want to do anything to give FoMoCo an excuse not to honor it.
thanks
DeesO

ceetwarrior

03-29-2005 08:23 PM

Deeso, I'm not sure if he's ford cert or not. You can give him a call: Flying V Custom Diesel, Falcon (719) 683-4747

Mike G

03-30-2005 11:09 AM

Quote:

Originally Posted by DeesO

Is he ford certified? Its still under warranty, and I don't want to do anything to give FoMoCo an excuse not to honor it.
thanks
DeesO

Have you checked with Ford to see if they will still honor your warranty regardless...

--Mike

DeesO

03-31-2005 12:39 PM

Looks like the dealer will put it on for me. While I think dealer mechs are overpriced, and don't do as good of work as a lot of the other shops, FoMoCo will have no excuse for not honoring my warranty for a EGT probe that was installed by their mechs.

All times are GMT -5. The time now is 05:56 PM.