Good metal workers in SE NH
I might be looking to have a battery holder made that attaches to the frame of my 99 F150, and I was wondering if there were any good metal formers/benders/welders in the Seacoast NH area that have good rates. Thanks!
|
how far from the sea coast are you willing to go?
|
should be able to put two red top optimas in the stock location with very little work
|
never mind, built it myself out of bar steel...
there was no room in the engine compartment, I had to built s shelft behind the transmission under the truck. |
All times are GMT -5. The time now is 02:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands