Lots Of Parts
 

Hey Fellow Iowans....lets help a guy out. This is a listing on Ebay that is over. It was for a truck with a TON of extra parts. The opening bid was $1000 and no one bid on the truck. I have been talking with the gentleman selling this stuff. He said if the truck didn't sell he would sell the parts individualy. I got dibs on some of these parts including the bumpers, tool box and door, hood.....not sure exactly because I haven't seen all the stuff yet. I might go next week and take a look. If anyone is interested in the truck or the parts, lets get this stuff off of this guys hands. He needs to get rid of it, and I know you all need the parts, or the whole truck. Contact me by email if you are interested...I will get down there and check the stuff out.
************************************************** ******
1968 F100 Ranger longbed 390 V8 / C6 Automatic transmission - 9 3/8 inch 3.50:1 rear - tool stowage under passenger side of bed (rust free) - also have additional tool stowage box from another truck. Major rust is on the tailgate - have better tailgate to go with truck. Interior is shot. Includes perfect dash pad (not installed). Truck runs but needs engine rebuilt. Pertronix ignition, big distributor cap upgrade, 8.8 MM spark plug wires, new plugs. truck starts great. 2V carb with manual choke. 4 new Monroe shocks. New poly bushings in rear springs. Springs treated with POR-15. Started working on engine bay - inner fenders treated with POR-15, engine parts painted Chrome bumpers front and rear, including brackets, Moulding enough to do about two trucks. Extra rust free inner fenders, extra fenders with minor rust. Extra hood, 3 or 4 dash bezels, plus a stainless dash bezel from an F-600 - including vac. gauge. 2 sets of hood hinges. Power steering box, master cylinder, 3 horn rings, rebuilt two speed wiper motor, heater blower assaembly. Full set of shop manuals, advertising folder, letter from Ford with build sheet info. Lots of engine parts. 360 block (pistons stuck) - 390 crank in great shape (stored upright) - set of C8AE-H heads - more parts - too many to mention

where is this truck at ?

Listing says he's in Urbandale unless I'm looking at the wrong one.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2488124693&catego ry=39414

Shane

Yes, He is in Urbandale. I know him..... not well, but did a fovor for him and he did one for me. I would say he's a straight-shooter. He won't be the cheapest, but will have decent to very good stuff. ( Unlike me, most of my stuff is more picking from parts trucks - except my daily driver which has very little rust).

Scratch that last note about "not the cheapest" I have seen him sell PRIME stuff.... and hey, it just costs $$$. He has a lot of stuff and it he will part with it ALL for $1000?!?!?! It will not be a waste of time to look, I'm sure you'll find something you like. He did sell me a steering column for a very good price.... and then gave me the manual gear box to go with it.

He's a good guy.