mainer needs a local shop ???
 

1978 bronco(old) 351m(tired noisy smoking) np235 np205 open
diffy's no options dark brown metalic dented heavily been off a
bridge by a previous owner but still running
1979 bronco(new un) rebuilt 351m (starts nice and idles nice at
apx 650 with oil pressure at the m on the idiot gage) c6 is shot
and dead, np205 power-loc/trac-loc gt bar map light ac(in the
back in a box but shipped on it) chrome, rear spare mount
body is straight body rear wheel well brows and driver's
floorpan (replaced) rusted previous owner spent at least 3
grand on everything but the body and trans then never ran it
when the inspection sticker ran out

ok am gonna get a wide ratio c6 for the new bronco anybody do these things competively and compitently up here New england

also lookig for a machine shop in maine that knows 335 series motors 302boss/302c aussie/351c/351m/400 and i can trust not to screw things up as i am gonna bore and stroke the old motor to 427ci and i have a set of aussie 302C heads to be cut and finished

i don't wanna find out what i will do if some one screws these thinks up

HELPPPP there must be a few racers/builders up here

thanks
ps the stroked 351m/400 will go with the wide ratio c6 eventully, lol

Hey man, Call the Napa Machine shop in westbrook, Talk To a Guy Named Napa Bob he will either do it or tell you who to can.
Also I Think Its In NH but Look up R&L Engines For REAL Performance and Vary Professional service!! If Youve Got The$$
Let Me Know How It Works out.
Napa Bob 207-856-6996

thanks guy does he, that you know of, have exper with the 400 or 351c proformance builds

Im shure of it! Call em' and talk to him about it, He'll be able to help you, no doubt in my mind let me know how it works out!