What do you want to see on the 2016 truck?
 

I want some better headlights.

Get rid of those stupid looking farm implement fenders from the dually...

Yes I bought one anyway, but was/am not happy about those POS fenders...

I am with BigF350, New, updated headlights, tail lights, etc. Of course as I don't own a SD (yet) I can't say what one would need as far as functionality. (I'm impressed with the current iteration!).;)

I would like to see a pick up body with integrated storage areas like a utility body but with the body lines of a factory bed. Royal Body used to have one but they don't offer it anymore, that's a shame.

I would like Ford designers to get away from the ever-growing sizes of the grilles and headlights. The earlier SD's are just more classy looking in that respect. And the need to plaster "SUPER DUTY" everywhere has became a bit redundant.

Remember those old Ford trucks with the compartments in the lower bedsides? Yeah, those. And maybe bedrail bins too. And while I'm on about bedrails- enough with the plastic already.

Oh, and bring back the Excursion...

I would like to see better usage of the center LCD screen with display for DEF, EGT Temps. Better Headlights, and a truck not covered in rust from the factory like my 2011.

Oh yes- this too. If I were ever to buy one with these fenders, it would go straight to the body shop to have old ones put on...

1) self leveling projector hid/led headlights
2) LED bulbs in mirrors, headlights and in the bed
3) Non Chrome package
4) accessible pass through wires in the engine bay (instead of the short ones you can barely reach)
5) power feed to the rear of the truck
6) A full size fuel tank on every wheel base truck
7) Use the center info screen, or tie into the nav screen for full gauges. I would love to see different read outs from the obd2 without needing the dashdaq.

I know it's wishful thinking, but I would like to see vinyl flooring and a manual transmission in them. The clean up in the truck was so much easier then IMO....and every manual transmission I've ever had outlasted an auto.

Ditto the vinyl flooring, I have a habit of FUBARing carpet!:D

A different door handle design.

I don't currently own a Superduty, but can 100% for sure say I will in the future. One of the handiest things I have ever done to my 2000 F150 is an on board air system that gets up to 115 psi and can for a short time run air tools or fill tires up to 60 psi easily. A factory air system would be extremely nice. Also as much dry storage as possible.

A drivers cockpit where everything is placed where it makes sense.
Why can't Ford use the design from one of their own RV chassis?
Almost all of the buttons and knobs should be bigger and they should all have separate adjustable colors and back light. Sets of knobs of the same color for similar functions.

I would like to see a close to possible dust free cab seals.I rarely have windows down and still get a fair amount of shine time on interior.