Parting Complete 1978 Ford F250 4X4, 78 F250 2wd, & 79 F150 4x4, 1973-1979 PARTS!
 

Let me start off by saying I've parted out a bunch of 73-79 Ford trucks over the years and I have a large inventory of good useable parts. If you're looking for something that's not listed, chances are I may have it. The trucks I am currently parting are shown below, and the price list is just a partial list (since I can't list eveveything lol). Pm me with what you're looking for.

1978 F250 4x4, 138K original miles, regular cab, 8' box, 351M, NP435 4-speed, NP205 transfer case, Custom trim package, blue interior:

Bed – driver’s side in good shape, passenger’s side has some damage from tree falling on it, pretty solid from South Carolina, $250
Frame – straight and solid, $250
High pinion Dana 44 – complete hub to hub in good shape, $250
Dana 60 rear end – good shape, $200
NP435 4-speed trans – shifts good, $250
NP205 transfer case – good shape, $150
4X4 steering box – good shape with pitman arm, $100
351M – haven’t ran it, but turns over freely, $350
Fender’s - $35/piece
Tailgate - $50
Hood - $75
Radiator - $75
Core support - $50
Inner fender splash shields - $25/piece
Headliner trim - $45
Guage cluster - $45
16.5” rims - $10/piece
Misc interior parts - make offer

http://i265.photobucket.com/albums/i...ps20a571a5.jpg

1978 F250 2wd, one owner, 54K original miles, regular cab, 8' bed, 351M, NP435 4-speed, red exterior, black interior, Custom trim package:

*Prices similar to above

http://i265.photobucket.com/albums/i...psa6ab61a9.jpg

1979 F150 4x4, one owner, 92K original miles, regular cab, 8' box, Custom trim package, 300/6, NP435 transmission, not sure about transfer case (I'll have to check), 9" rear with posi, brown exterior, brown/tan interior, complete Fisher plow set up, factory topper sold.

*Similar prices as list above
*Fisher plow set-up, complete original set-up from 1979 in great shape, still have the installation instructions - $500

http://i265.photobucket.com/albums/i...psa37fbf7b.jpg

http://i265.photobucket.com/albums/i...psa645699b.jpg

A few pics of some random parts I have kicking around:

http://i265.photobucket.com/albums/i...psb08b9009.jpg

http://i265.photobucket.com/albums/i...ps27d3741c.jpg

http://i265.photobucket.com/albums/i...ps9610706c.jpg

http://i265.photobucket.com/albums/i...psa443f236.jpg

http://i265.photobucket.com/albums/i...ps5df8476b.jpg

http://i265.photobucket.com/albums/i...ps750a568b.jpg

http://i265.photobucket.com/albums/i...ps7379ac9a.jpg

http://i265.photobucket.com/albums/i...psa1749241.jpg

http://i265.photobucket.com/albums/i...ps899b95b8.jpg

http://i265.photobucket.com/albums/i...ps96bfcba4.jpg

http://i265.photobucket.com/albums/i...nzilla/012.jpg

http://i265.photobucket.com/albums/i...ps3ca1a91e.jpg

http://i265.photobucket.com/albums/i...ps286ad869.jpg

http://i265.photobucket.com/albums/i...ps8d8223ef.jpg

how much for the door panel in the 2nd post 2nd pic, and where in ny are you?

oh and i need a front window for my 73 f250

Believe it or not that door panel sold on eBay this morning (47 bucks). Unfortunately it's the only green door panel I have.

What window are you looking for? RH/LH door glass or windshield?

i'M INTERESTED IN THE MANUAL TRANSMISSION TUNNEL COVER sHIPPED TO mAINE 04093

$75 shipped

I'm interested in a tailgate if its not all rusted out like mine lol. Also, does it include the hardware?

Tailgate is in good shape, a few dings in the top, but not rusty. I can include the hardware, let me know what hardware you need.

im interested in the manual pedals and every thing it needs to hook up to the tranny i am doing a manual swap in my auto truck and the tunnel plate

I can provide all that...send me a pm

would you be willing to part out the '78 frame? I need two crossmembers as well as the brake line bracket on the driver's side.

I'd like to keep the 4x4 frame intact but I am cutting up the 78 F350 2wd frame. Any idea if they're the same?