Project Daily Driver, 1990 F250
7 Attachment(s)
Hello everyone! Amazing forum! Have learned so much and had so much help since joining!!! I have had a bunch of Ford trucks, mostly 1/2 ton. I want to get a bigger boat soon but need more than a 1/2 ton truck. I didn't want to spend 50-60K for a new 3/4 or 1 ton truck or 30K for a used 3/4 or 1 ton truck. So last fall I started looking for a older truck to restore and I finally found one on 04/19/2014. So here it is!! 1990 F250 Super Cab XLT Lariat 2wd 460/auto Red-n-Camp Conversion truck with 69K original miles!!! Here are the pics of how I got it!
|
So here are some more pics of it as I am working on it.
https://cimg9.ibsrv.net/gimg/www.for...b7112b0618.jpg https://cimg0.ibsrv.net/gimg/www.for...b7cca37f5d.jpg https://cimg1.ibsrv.net/gimg/www.for...ebbb660359.jpg https://cimg2.ibsrv.net/gimg/www.for...51c5c83ae5.jpg https://cimg3.ibsrv.net/gimg/www.for...4e7057ea27.jpg https://cimg4.ibsrv.net/gimg/www.for...9854880ad1.jpg |
|
And New paint, wheels, tires, lights, grill, and emblems cleaned. More pics to follow tomorrow! Been busting my butt the last 2 months getting this truck fixed up! It's a labor of love!
https://cimg5.ibsrv.net/gimg/www.for...e1cecd3328.jpg https://cimg6.ibsrv.net/gimg/www.for...fcc7cea37e.jpg https://cimg7.ibsrv.net/gimg/www.for...af16848861.jpg https://cimg8.ibsrv.net/gimg/www.for...0e3d8221ef.jpg https://cimg9.ibsrv.net/gimg/www.for...e3181b16e4.jpg https://cimg0.ibsrv.net/gimg/www.for...55fc40d8ab.jpg |
Talk about transformation your truck looks good.
|
That's an impressive before and after collection. Is the tailgate an aftermarket replacement or from a junk yard? Mine's in bad shape and I am planning on having mine repainted eventually. I didn't know if it'd be cheaper to repair the old one or get an aftermarket replacement.
Did you paint it yourself? What did you do with the white in the door jams and inside the engine compartment? |
That truck looks awesome, Glad to see its making progress on the body situation.
|
Thanks for the all the compliments guys!! Rachet, the tailgate is repro from LMC Truck it was $138.00 shipped to my door. At that price it was better than trying to hunt the junk yards for one.
|
Rachet, I painted the door jambs, tailgate jamb, inside gas doors myself. I did not do under the hood or the bed. The bed I'm just going to do a spray in liner. I don't have access to a spray booth so I had the local maaco paint the truck for $600.00, but I masked the jambs myself and disassembled the truck in their parking lot (lights, mirrors, trim, etc) so the paint job came out good.
|
Very nice looking transformation.
Trav |
Originally Posted by emspjay
(Post 14424496)
Rachet, I painted the door jambs, tailgate jamb, inside gas doors myself. I did not do under the hood or the bed. The bed I'm just going to do a spray in liner. I don't have access to a spray booth so I had the local maaco paint the truck for $600.00, but I masked the jambs myself and disassembled the truck in their parking lot (lights, mirrors, trim, etc) so the paint job came out good.
1. How far did you go in terms of sanding? I see that you sanded alot where what I think were decals were. Were you trying to go to bare metal or just trying to get it rough enough to stick? 2. I'm assuming that you removed all the trim, bumpers, lights, etc. Is that right? 3. How much did you tape, did you cover the windows completely? Did you remove the trim around the windows? 4. Was this all hand sanded or did you use a machine? |
Originally Posted by Finger__Rachet
(Post 14425101)
Okay, I want to ask more about the paint process that you went through. I'm pretty much a rookie but I want to do basically what you've done, prep my truck and get a low cost paint job. So if you don't mind, here are my questions.
1. How far did you go in terms of sanding? I see that you sanded alot where what I think were decals were. Were you trying to go to bare metal or just trying to get it rough enough to stick? 2. I'm assuming that you removed all the trim, bumpers, lights, etc. Is that right? 3. How much did you tape, did you cover the windows completely? Did you remove the trim around the windows? 4. Was this all hand sanded or did you use a machine? |
Cleaned up the interior today looks good for 24 years old.
https://cimg6.ibsrv.net/gimg/www.for...ff8669b446.jpg https://cimg7.ibsrv.net/gimg/www.for...f54e3b21f4.jpg https://cimg8.ibsrv.net/gimg/www.for...3855ce02af.jpg https://cimg9.ibsrv.net/gimg/www.for...3c69192fec.jpg https://cimg0.ibsrv.net/gimg/www.for...653b999604.jpg https://cimg1.ibsrv.net/gimg/www.for...e543ca4703.jpg https://cimg2.ibsrv.net/gimg/www.for...2e82a6e0e1.jpg https://cimg3.ibsrv.net/gimg/www.for...f0ff0fb8fd.jpg https://cimg5.ibsrv.net/gimg/www.for...73974d92e7.jpg https://cimg6.ibsrv.net/gimg/www.for...445c118698.jpg https://cimg7.ibsrv.net/gimg/www.for...ff14b1fcc5.jpg https://cimg8.ibsrv.net/gimg/www.for...d94d4f6a3d.jpg |
Also got the spray on liner done on the tailgate.
https://cimg0.ibsrv.net/gimg/www.for...7d33d518f1.jpg https://cimg1.ibsrv.net/gimg/www.for...95fa936eb8.jpg |
All times are GMT -5. The time now is 09:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands