2nd (or 3rd) hand PIAA fog lights
 

Hi gang,
I lucked into these H3 fog lights but I can't seem to find a part no. on 'em. They don't appear on the PIAA site.
I'm hoping to find replacement reflectors/lens for them.

https://farm3.staticflickr.com/2934/...b35d4ccb_c.jpg

https://farm8.staticflickr.com/7134/...b30cce78_c.jpg

https://farm8.staticflickr.com/7073/...746d64a3_c.jpg

Also if someone can give me a line on what adhesive for the lens would be approapriate. In cleaning these up, one of the lens popped out.

Thanks and a lift of the lynch lid.
Gus

Since sending two emails from the contact us link for PIAA and receiving no response over two days I called 'em yesterday and they said to use Gorilla Glue to affix the lens to the body of these lights. I've used Gorilla Glue before and am dubious about its sealing properties. Any other reccomendations would be welcome.

I just got another email from PIAA "That is an old school P-1000 lamp. We no longer have any bulbs for that lamp. You can try and search the web for some part number is 13355. As far as a specific sealant I would go with and epoxy it will have better strength than an RTV".

So it looks like I need to find a high endurance epoxy now, if I choose inkeeping with PIAA's reccomendation.