Project Farm Truck
Well here it is I bought this truck for $800 after I wrecked my Ford Ranger.
http://i219.photobucket.com/albums/c...psaf51fad5.jpg I literally bought this right off the guys farm. Couple things were wrong (actually alot of things) but I needed a new vehicle. First off was the frame. Back half was rotted off. http://i219.photobucket.com/albums/c...ps1164a744.jpg Got all that fixed with some 4" C channel. after that was to the front end. New bushings tie rod shocks and coils. http://i219.photobucket.com/albums/c...ps66d90b89.jpg F250 coils and shocks http://i219.photobucket.com/albums/c...ps53809b3f.jpg After that was to find a better bed because the one I had was so rusted out. Found this for $100 bucks http://i219.photobucket.com/albums/c...ps9d8ffa06.jpg Actually only cost me 50 cause i scrapped the old bed at the same time. http://i219.photobucket.com/albums/c...ps50a2872e.jpg Picked up a can of spray paint just for the time. http://i219.photobucket.com/albums/c...psf1f1292e.jpg Built myself a headache rack. http://i219.photobucket.com/albums/c...ps0662b3a8.jpg And then i went to the junkyard and found a new grille and front bumper. http://i219.photobucket.com/albums/c...ps98hna9qt.jpg |
Awesome work there Andrew. Welcome to the forum.
|
Originally Posted by Grubbworm
(Post 14031952)
Awesome work there Andrew. Welcome to the forum.
Getting my body lift ready to go on when its warm lol. http://i219.photobucket.com/albums/c...psdclhnkqj.jpg Also decided to get some dodge towing mirrors. I love them http://i219.photobucket.com/albums/c...psdclhnkqj.jpg http://i219.photobucket.com/albums/c...psueapudti.jpg Next came the paint and alittle body work. http://i219.photobucket.com/albums/c...ps0xid3rtj.jpg http://i219.photobucket.com/albums/c...psv80meno9.jpg http://i219.photobucket.com/albums/c...psnk1l4xfo.jpg My buddy just sold me some dodge rims and tires for 100 bucks. I had to grind the center bore out some but it works. http://i219.photobucket.com/albums/c...psgdewzxk0.jpg http://i219.photobucket.com/albums/c...psjooibj6s.jpg Ordering these to go with them tomorrow!!! After These Ill get some wheel spacers. http://i219.photobucket.com/albums/c...pstbxsccot.jpg |
I like those center caps. Where did you get them and how much $$$?
|
eBay. They were $60 shipped.
|
Originally Posted by andrew_deaton
(Post 14038100)
eBay. They were $60 shipped.
Can you give me some more information on them, so that I might get a set too. |
http://www.ebay.com/itm/1980-1996-F150-BRONCO-Wheel-Hub-BLACK-Center-Cap-SET-/360330345802?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1995%7CModel%3AF-150&hash=item53e55cbd4a&vxp=mtr
Theres a link to it |
Have you had any dealings with these people? They look closer to me. 1980 1996 Ford F150 Bronco Van Chrome Center Caps Hubs Set Black Center New | eBay
|
Originally Posted by Grubbworm
(Post 14039049)
Have you had any dealings with these people? They look closer to me. 1980 1996 Ford F150 Bronco Van Chrome Center Caps Hubs Set Black Center New | eBay
Sorry that was the wrong link. This is what I ordered. I got the link from my email from them. http://m.ebay.com/itm?itemId=330976110248 |
Just got a package in the mail today!!!!
http://i219.photobucket.com/albums/c...psnl4nsfrn.jpg Also I got a new rear bumper. Pictures suck ill try to get better ones tomorrow. http://i219.photobucket.com/albums/c...psrolloyfy.jpg http://i219.photobucket.com/albums/c...psec3wxllm.jpg |
Nice looking truck. My 88 has white with the tailgate letters black.
Trav |
Well i finally got around to putting these center caps on. I will be ordering the spacers either tomorrow of saturday.
Here is before http://i219.photobucket.com/albums/c...psi0wabnyu.jpg Putting the caps on. I had to drill a 3/16th's hole where they are ment to bolt. Then tap it to 1/4in. course thread. Didnt take to long to do and its easy. http://i219.photobucket.com/albums/c...ps1hgpbqro.jpg And Finally After on the fronts http://i219.photobucket.com/albums/c...ps80abdpwj.jpg And the rear http://i219.photobucket.com/albums/c...psqcaxbokf.jpg |
Finally got around to putting the headache rack back on after I painted it with truck bed liner.
http://i219.photobucket.com/albums/c...psnavcmlde.jpg |
I got my wheel spacers in today. They are great. Just wide enough and the thread is still the same.
http://i219.photobucket.com/albums/c...ps4j6nutdk.jpg Ill get a picture of the difference tomorrow |
well got my wheel spacers on.
http://i219.photobucket.com/albums/c...psurpy3vy8.jpg http://i219.photobucket.com/albums/c...ps5ggxptlv.jpg I got these in too to fix my license plate light. Cost 10 bucks for 20 of them http://i219.photobucket.com/albums/c...pskarybgrt.jpg Also wired up my foot well lights. http://i219.photobucket.com/albums/c...ps52ie3ipw.jpg |
All times are GMT -5. The time now is 07:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands