Originally Posted by firewood truck
(Post 11739556)
I have a low mileage BW 1356 t-case. Slip joint rear output, no speedo cable hole. ( it has a factory plug in the hole) I'm in Baltimore, you come and get it- you can have it. The scrap yard doesn't give enough to make recycling it worth while, so maybe someone else can use it/keep it for a spare.
Originally Posted by Red460
(Post 11746478)
Guess I should put something up here for free instead of being greedy and asking for things, lol. Got a ladder/lumber rack that's on my 95 f250 supercab that needs to be gone asap had it on craigslist for awhile with no interest. It's homemade from the construction company I bought the truck from. Anyone want it let me know. So if anyone nearby come get it. If not going to scrap it.
pics? SIDE NOTE: if possible could we (all who are offering parts for trade/free, ect in this thread) try to post pics of the parts in question? just so people will have an idea of the part in question (and can see if its what they need)?? heres my parts pic of what im offering (yes they come off tomorrow!!) Head lamps and corner lights, still looking for my turn lamps, if i cant find any of them ill pull from j/y Older pic of the truck closer to when I first got it (just got my euro clear turns) but it shows the corners and headlamps. http://i854.photobucket.com/albums/a...SL732303-1.jpg http://i854.photobucket.com/albums/a...0/SL732302.jpg |
When I get on the computer later today I'll post some, would do it now but just got off work.
|
Let me know what you need for shipping Jaime to 74012. All I need are the lights on the passenger side. Thank you!
|
Originally Posted by bruno2
(Post 11768686)
Let me know what you need for shipping Jaime to 74012. All I need are the lights on the passenger side. Thank you!
well the screws appear to be rusted in place so not sure if i can get them out or what ever, but im not giving up on them... |
I removed the bug deflector. Free to someone in the Denton, TX area.
http://i1253.photobucket.com/albums/...c/IMG_1993.jpg |
Be sure and send your paypal info in a PM. Dont forget they are going to charge you a few dollars as well and that should be in the bill.
|
Does anyone have a blower motor housing (what the motor bolts to) that will fit a 92 f150 with AC? Mine got taken out by a rogue tire shred...
PM me if you have one, I'll be happy to buy it! |
If my "adopted" son in law doesn't need it, I think 87-93 are the same, numberdummy would know, I have a 90 AC case that I gave to him since mine is now fitted with a 96 case.
|
roof clearance light bezel
Hello,I have a 88 F250 and I need a roof clearance light bezel.
|
Originally Posted by dmags
(Post 11779626)
Hello,I have a 88 F250 and I need a roof clearance light bezel. I scraped some snow off it last winter and it exploded! :-arrghI would be interested in one or the whole set.Thanks in advance
|
i will post a pic a soon as it stops raining.To better explain I was removing snow off the ol girl and just tapped it and it shattered.It seems time has made it appear to have gotten thinner and the plastic is worn. I taped over it to keep water from getting in.I looked on e-bay and local bone yards with no luck. Thanks for the reply,
|
well I found one of my tails just need the other, I think it was the drivers side...
|
Moon Visor..
Found mine one Craigslist for 50 bucks. with lights. Its a good place to look...Cost me about 70 bucks with gas for it. Definately worth the drive :)
Originally Posted by xdevdogx
(Post 11547464)
I'm looking for a moonvisor (the one with the lights) for a 97 350. These things are hard to find, I dont think they make them anymore. I'm in washington state.
|
Free Parts...
Free to anyone in the DFW Metroplex that comes and picks them up: antena mast, 4-spd 4x4 crossmember, T-18 shifter, transfer case shifter, 4-spd trans tunnel cover, external slave cylinder & hose. But you must take all of it!
|
parts 87-96/97 free to good home
Originally Posted by fudimanuchi
(Post 11718364)
I'll get a weight check and a cost but I don't think that the solenoid is any good. But I'll look around and see if I can locate one that was working.
|
All times are GMT -5. The time now is 07:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands