|
Lincoln Y block
Hello all,
I am new to this site and very much a novice at posting. I do love old fords and am looking for a rocker shaft for a Y block Lincoln 332. I'm not having much luck. Maybe someone out here has one or knows where to point me. Thanks for your help, Jack Lewis |
Hi and welcome to FTE. There isn`t a lot out there for these engines, I`m moving your post to the Y-Block V8 (239, 272, 292, 312, 317, 341, 368) forum in hopes that someone will be able to help you.
|
Originally Posted by Fomoko1
(Post 13716887)
Hi and welcome to FTE. There isn`t a lot out there for these engines, I`m moving your post to the Y-Block V8 (239, 272, 292, 312, 317, 341, 368) forum in hopes that someone will be able to help you.
|
Halfjack, Try over on Y-Blocks Forever There are a couple of guys into Lincoln Y-Blocks over there.
|
Are the rocker shafts the same for the Lincoln cars and trucks? If so, I recently (this last Monday) saw a '54 Lincoln Capri in a local wrecking yard. Engine was pretty much complete. Missing the valve covers. I'm in the LA, Calif. area.
|
Yes Lincoln and Truck engines are the same family...
|
Thanks Y-Blockhead. I thought they were, but wasn't entirely sure. Halfjack, if you are still in need of the rockershafts , let me know. I'd be willing to pull them and ship them to you. I also am new to this site, and so I don't know just what the rules are concerning contacting other members. Probably for me, phone would be best as I am away from home quite often. Maybe some others may be of some help. Thanks, Jeff
|
After 10 days as a registered user with at least 5 posts you can use PM's (Private Messages) for replies. That feature is in your User Control Panel.
|
Thanks FOMOKO1 I'll wait till we hear back from halfjack, then I'll figure out how the PM's work. Jeff
|
Now that you have 5 posts and have been a member over 10 days so you can send PM`s. Go to your Control Panel and send one!
|
Hello Jeff,
I found a complete engine in Oregon and am heading down tomorrow to get it. I sure appreciate the help I have gotten. If anyone needs the rest of this 317 Lincoln let me know, but I am keeping the heads. Jack |
Originally Posted by halfjack
(Post 13726322)
Hello Jeff,
I found a complete engine in Oregon and am heading down tomorrow to get it. I sure appreciate the help I have gotten. If anyone needs the rest of this 317 Lincoln let me know, but I am keeping the heads. Jack Mike |
Sorry I do not have the carb.
jack |
If it has the truck oil pan and pickup I might be interested.
|
I don't know how to tell if it has the truck pan...front or rear sump maybe?
|
| All times are GMT -5. The time now is 07:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands