New user to the Sixties Ford Truck
Hi Everyone,
I am new to the Ford Truck Enthusiasts forum. I just purchased a 1962 Ford F100 Unibody. I am very excited about purchasing my first classic vehicle. I am like others here on the site. I would like to know more about my warranty plate information. My Vin# is F10JD301346. Here is the rest of my plate: WB - 114 Color - T Model - F10J Trans - A Axle - 11 Max. G.V.W. lbs - 05000 Cert - 114 H.P. R.P.M. - 3600 D.S.0. - 61 Thank you in advanced for any of your help on deciphering this information. jasch :):-X04 |
Welcome to FTE! I moved your thread to the Uni forum for ya!
|
Thank you!
Thank you for moving the thread that I posted for my 1962 Ford F100 Unibody. I hope that someone can help me out with my warranty plate information.
:-X0A6 |
No one really comes here but i drop in sometimes..
F10= F100 J= 223 inline 6 D= Dallas Texas assembly 301346= Consecutive unit number Born in June of 1962 WB - 114= Distance of wheels center to center a short bed Color - T = Sandshell Beige Model - F10J Mis on the last digit F100=5000GVW F101 4000GVW F102 5000GVW Trans - A = 3 speed standard ford Axle - 11 = ford 9" 3.7 ratio non LS 3.3M rating Max. G.V.W. lbs - 05000 = Maximum vehicle can weigh with load and passengers. Cert - 114 + Net Horse power the 223 produced H.P. R.P.M. - 3600 RPM where the 223 produced the 114 HP D.S.0. - 61 = Dallas Texas. Where the dealer ordered the truck from. Welcome to FTE and "66" ownership. Garbz |
Welcome! i just bought a 62 unibody a few months ago. We should compare notes.
|
compare notes
Originally Posted by 62ESQ
(Post 13442330)
Welcome! i just bought a 62 unibody a few months ago. We should compare notes.
|
Originally Posted by garbz2
(Post 13434389)
F10= F100 2WD
WB - 114= Distance of wheels center to center a short bed :-huh Model - F10J Mis :-huh on the last digit F100=5000GVW F101 4000GVW F102 5000GVW Trans - A = Ford type 3.03 3 speed manual all syncromesh transmission. Axle - 11 = Ford 9" - 3.70-1 - no Limited Slip - 3,300 lbs rear axle capacity. Could have been sold as a Cab & Chassis, Open Drive-Away Chassis & Cowl or Cowl & Windshield. Bolh: No bed, no cab, just a dashboard, floor pan, bare frame rails behind it, fuel tank located on left frame rail. Model code F10J is correct for 1957/62's, refers to F100 2WD, 5,000 lbs. GVWR |
Originally Posted by NumberDummy
(Post 13540357)
114" Wheelbase and that's it. You cannot say short bed because there's no way to know if these trucks came with any bed originally or not. VIN Series code (1st 3 digits) doesn't decode to pickup until 1973.
Could have been sold as a Cab & Chassis, Open Drive-Away Chassis & Cowl or Cowl & Windshield. Bolh: No bed, no cab, just a dashboard, floor pan, bare frame rails behind it, fuel tank located on left frame rail. Model code F10J is correct for 1957/62's, refers to F100 2WD, 5,000 lbs. GVWR |
Originally Posted by 37 Ford guy
(Post 13540758)
The OP said it's a "unibody" with 114" wheelbase....that's a short bed. How could that be sold as a "Cab & Chassis, etc"?????
So, I thought the OP had a 1966, no Uni's after 1963. 66 in this context refers to Uni body style. |
Originally Posted by NumberDummy
(Post 13540840)
Well obviously it couldn't, I read Dave's decode which threw me a curve, didn't read post 1. Dave said Welcome to FTE and "66" ownership.
So, I thought the OP had a 1966, no Uni's after 1963. 66 in this context refers to Uni body style. |
All times are GMT -5. The time now is 07:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands