|
In AUGUST the waters tricklin'....BS n' stuff thread...
So...I'll start this show this month and try to be somewhat proactive...oh and extra points if you can tell me where the title of this thread came from without using the internet....
BS away..... Did I mention I have a B.S. in BS?}> |
Afternoon Dan and Les
-The Great |
Good evening everyone...
Hope you had a great day.. |
Good evening everyone.
Thank you Pat for figuring out the correct date. I got to work this morning thinking it was the 31st |
Guys,
My next Auto-Cross is this Sunday. It's in the front parking lot of NHMS. |
Been getting ready for this weekend.
Here at the campground is Christmas in August a Big to Due. We will have a Turkey dinner, a Yankee swap, a ice cream social and then Fire Works. This will happen on Saturday. Starting at 1pm. |
Good afternoon everyone..
Hope your Friday is going good.. The weekend is within reach..LOL |
Evening Dan and Les.... figures, I am in Rhode Island until Sunday
-The Great |
Das wochenende bleibt hier......Es gibt nur eine ding zu machen ....Bier trinken und die lastwagen reparieren. Ya good luck reading that. I was feeling a bit german tonight...
|
Originally Posted by downhillpat
(Post 13399686)
Das wochenende bleibt hier......Es gibt nur eine ding zu machen ....Bier trinken und die lastwagen reparieren..
-The Great |
Good afternoon everyone..
Hope you are enjoying your Saturday.. |
Good morning everyone..
Hope you have a great Monday |
Afternoon Les and Dan
-The Great |
Good evening NH
Clint - I took 3rd in class Sunday at the auto-x. 0.2 behind an S2000 and if I remember .4 or .5 behind the same Miata that always takes 1st. Tried to get someone to tape a run for me but no one I knew was available and the hottie that runs was in my run group this time. |
Good morning Dan, Les, Pat and everyone..
Hope your Tuesday is going good.. Another beautiful day here |
Originally Posted by 7283-F250
(Post 13406606)
Good evening NH
Clint - I took 3rd in class Sunday at the auto-x. 0.2 behind an S2000 and if I remember .4 or .5 behind the same Miata that always takes 1st. Tried to get someone to tape a run for me but no one I knew was available and the hottie that runs was in my run group this time. -The Great |
Good morning and have a productive hump day NH
|
Originally Posted by CLINT-THE-GREAT
(Post 13409262)
Thats GREAT! You ever thought about getting a small in car cam? I can't remember the name... but its what SCCA and bikers use...I think they are only like $200 bucks
-The Great In need to figure out where my tail light is leaking and figure out a new carpet piece for the rear and I found mold on the current carpeting in the rear of the car. I did atempt to make a fiberglass part but it's not turning out so well. About $30 into that part so far and will probably have to scrap it. Going to price out new carpet at ford. |
Good morning everyone..
Hope your having a great Thursday.. |
Originally Posted by 7283-F250
(Post 13412183)
Unfortunatly I can't afford 2 bills now. I may try to engenious something for my camera to mount to.
In need to figure out where my tail light is leaking and figure out a new carpet piece for the rear and I found mold on the current carpeting in the rear of the car. I did atempt to make a fiberglass part but it's not turning out so well. About $30 into that part so far and will probably have to scrap it. Going to price out new carpet at ford. You can secure the camera on car a couple ways, you could put it in between the head rests, you could also put it IN the head rest extenders (raise headrests up completely). You could also attach suction cups to it and put on top of car, of course with a strap attached to it in case it comes unsuctioned -The Great |
Originally Posted by CLINT-THE-GREAT
(Post 13417221)
Could do what alot of us did before the sport cam... take your regular camera, and it should have a threaded female end to screw in a tripod, go to home depot and find the appropriate bolt/thread, fabricate either a metal or wood mounting platform and attach bolt and nut with bolt facing upwards, then screw on camera.
You can secure the camera on car a couple ways, you could put it in between the head rests, you could also put it IN the head rest extenders (raise headrests up completely). You could also attach suction cups to it and put on top of car, of course with a strap attached to it in case it comes unsuctioned -The Great All that you mentioned is what I was thinking. Now actually achieving any of those is a feat in itself :-missingt |
Well I didn't think of that... probably have to take off 120-150 lbs off the car to compensate... but having her hold the cam is just as good!!! lol
-The Great |
Good morning and have a fantastic humid flash flood watch Friday NH
|
Good morning everyone
Hope your Friday is going good.. Rainy and humid here today |
Afternoon Dan and Les
-THe Great |
Weekend's over.
Back to work. Hope everyone had a good weekend. |
Good morning and hope your sunny Monday goes well and fast NH
|
Originally Posted by 7283-F250
(Post 13426606)
Weekend's over.
Back to work. Hope everyone had a good weekend. |
Good morning everyone
Hope your Monday is off to a great start.. |
Good afternoon New Hampshire. Anyone heading to the Ford Fest at NED this weekend? Thinking of heading up for Sunday.
New England Dragway - Home |
Where is NED?
I'm going to Conway, NH on Sunday to see some moose... -The Great |
You MUST be new to the area!!!!
NEW ENGLAND DRAGWAY !!!!!!!!280 Exeter Rd Epping, NH 03042 Probably an hour and a half from the White Mountain Ntl Forest. (if thats where the moose are) |
Good morning and have a terrific Tuesday NH
|
Morning NH...what a day for a daydream!!!
|
Wade, gonna drive across the whole state to get to eastern NH
-The Great |
Originally Posted by CLINT-THE-GREAT
(Post 13428895)
Where is NED?
I'm going to Conway, NH on Sunday to see some moose... -The Great
Originally Posted by CLINT-THE-GREAT
(Post 13432932)
Wade, gonna drive across the whole state to get to eastern NH
-The Great So you still in the area? And such a great feat. Couple hour drive across the state up in them parts. And New England Dragway. Ya. About 10 minutes from my house. Also. I need your schedule so we can get you to an auto-x. |
Ever see a truck frame snap? I did this weekend...just ask sqvishy and spacegrass...I wish I was videoing it...nothing hurt...ego and stuff yes...wish I could've stuck around longer to get the rear axle out...Had to be the coolest/saddest/gut dropping thing I've ever seen. I shouldn't have been surprised though, the PO used a miller welder side panel to patch the floorboards...the sticker was still on it...that's what we did sunday.
|
Good morning and have a productive hump day NH
|
Morning NH...rise and shine!!!
|
Good morning everyone..
Hope your hump day is a good one.. |
| All times are GMT -5. The time now is 12:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands