Engine Block Ground Cable
2 Attachment(s)
So I just put a new starter solenoid in my 1987 F250 6.9L. It went fine except for finishing and realizing I hadn't connected the engine block ground cable from where ever I took it off from while getting everything off the starter solenoid. Now I have no idea where that's supposed to connect! Help anyone? Sorry it's such a dumb question. I just don't feel like shocking myself or starting a fire.
I did start the truck before realizing I didn't have it connected and it was reading off the voltage meter. Hope I didn't damage anything. Here are two pictures. The first is me holding the cable that I don't know where to put. The second picture shows it on the right side along with the rest of the battery setup. Attachment 292901 Attachment 292902 Thanks for any help! |
Oh boy, I'm a fool. Answered my own question after looking a bit harder at a wiring diagram. Sorrrrrry.
|
All times are GMT -5. The time now is 05:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands