Upgrades for a V10
 

What are some good websites to get upgrade parts for a v10. Thanks.

Upgrades for a V10
 

Like what? The only things there are is larger throttle body,headers, cat back exhaust,air intake and K+N filters,Chips or Micro-tuner from right here @ the online store.

Upgrades for a V10
 

Look at it this way: Ford made the V10 so good to start with, it doesnt need many upgrades!!!:D

Upgrades for a V10
 

I have a very long and expensive history of modifying every motor I ever owned, until April 2001 when I took possesion of this truck.

Some day I will modify it, but for the last, (or first, depending on perspective), 32,000 miles I have never even once thought that it was underpowered or weak.

I have said it in hundreds of different ways, but I think that this is the funnest Truck I have ever owned! :-X04

And I am tickeled to death that feeding it 87 and the occasional bath is all this thing needs.

Fast, good looking, handles very well, did I say Fast:-X20 :-X24 :-X10

Upgrades for a V10
 

my husband wants to upgrade the exhaust and headers and a cold intake if they have one for me it fast enough.

Upgrades for a V10
 

JBA headers are nice headers, the stock air intake is a cold air intake already,do a search here with the search feature and look up zoo-dad air box mods. This is something he can do himself.You can buy a chip or micro-tuner from the online store here.

Upgrades for a V10
 

Do a bunch of searching and light reading right here and on the superduty forum, lot and lots of discussions about V10 exhaust modifications.

Many go-fast parts and other goodies are available on this site.

Summit catalog is required reading as is the Jeggs version, don't skip the JC Whintey, though some of their stuff is crap.

Be prepared for some sticker shock as headers and Y pipe are usually $500 and up, ( not the $89.99 small block Chevy prices.) Same with most other mods.

There are many folks here who have looked at the pricey things and found a "poormans" way... worth reading about.

Stop in the quick mart and get one or two Truck and/or 4X4 magazines... tons of ads for EVERYTHING truck and actually quite a bit for the V10

I you poke F-250, or SuperDuty, or Triton V10 into a "Google" search you can spend hours learnig about all the different ways folks spend $$$$$$$ on their truck, and all the different companies willing to take their money.

Check out eurkaboy.com Stan has done an extraordinary job of cataloging his mods with photos and notes.

Upgrades for a V10
 

Upgrades for a V10
 

Thanks for the link looks like alot of stuff for the truck

Upgrades for a V10
 

I'm still waiting on the part numbers on those 40 valve heads off of the Ford 427 Concept car. What was it like 500 hp, 590 torque? Now that's the engine Ford should put in their trucks. Even detune it a little to bring the torque down lower in the RPM range and it would still be a beast. We can still dream can't we?

JJ

Upgrades for a V10
 

I would like to see this modular V10 6.8L morphed into a V12 8.2L as a challange to GM to up the ante :-X04 or response if you have the opposit perspective

The 7.3 and 6.0 PSD HP and Torques have proved that the FoMoCo power train can take the strain if cooled properly.:-X10 :-X14

Upgrades for a V10
 

My next mod for Performance will be the Cyclone Power Fan. I want to pick up that 45 horsepower at 3500 rpms. Go to:usgear.com to check it out.