Ilya , would be interested in one . Thanks & good luck .
|
Originally Posted by 51PanelMan
(Post 14521777)
Update: I received a quote on getting the speaker bracket and radio support bracket reproduced a per the original. The initial cost isn't bad and the first run will be limited to 25 pieces. I'd like to know if there'd be interest from FTE members for these parts before I place the order. I'd prefer to have several or at least half preorders. It would about 1-2 weeks to get a run of 25 made. The new kit will also come with a copy of the instructions.
Since selling is not permitted in this forum, please PM or email me, and I'll provide you with the cost and take your pre-order. Thanks! EDIT: Forgot to mention that the speaker bracket will allow you to install a 6x9 speaker in the stock location even if you are not using the original radio. EDIT: I tried to PM you but it says your storage is full. |
An original is listed on ebay under 1952 ford truck for $70 . Ilya any idea how this price would compare to your repros?
|
Price will be around $50 plus shipping for FTE members and slightly more on eBay to help offset their fees. My kit will be complete with a copy of the instructions.
Hopting to get this done around September. |
As of 1:30 sun. bid is at @127.50 . Yikes !
|
Auction ended at $150.00 WOW !!!
|
As long as the estimated production cost remains as per the quote I received, my retail price will be cheaper.
|
An update on this... I've been very busy. Just recently dropped it off about a week ago at the shop. They've also been busy with other production work. I should have them in my hands in December.
|
Good news Ilya,
Keep us updated! |
radio adapter kit
Did you ever proceed with the radio adapter kit? If so could you contact me? I need a kit like this but I am so inept with this computer stuff! M-1 Mercury Guy
|
Originally Posted by M-1 Mercury Guy
(Post 14813130)
Did you ever proceed with the radio adapter kit? If so could you contact me? I need a kit like this but I am so inept with this computer stuff! M-1 Mercury Guy
Read the entire thread, and you'll get your answer. :) |
UPDATE!!
Just went by the shop. Production has started. I was given a completion date of February 12 or 13. So, hoping to have them in my hands in a few weeks. |
Sounds good! Keep us posted.
|
Originally Posted by 51PanelMan
(Post 15036764)
UPDATE!!
Just went by the shop. Production has started. I was given a completion date of February 12 or 13. So, hoping to have them in my hands in a few weeks. M-1 Mercury Guy |
FINALLY!!! They're in my hands. The final production cost was slightly higher, which will result in a modified purchase price cost, but not by much.
I'll start the process of contacting those that expressed interest. If I accidentally miss a contact, please follow up with me. Thanks. http://i1209.photobucket.com/albums/...ps3l7obnsl.jpg |
All times are GMT -5. The time now is 12:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands