Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   1957 - 1960 F100 & Larger F-Series Trucks (https://www.ford-trucks.com/forums/forum268/)
-   -   request info from mr. numberdummy (https://www.ford-trucks.com/forums/1189887-request-info-from-mr-numberdummy.html)

hiball3985 09-15-2012 03:37 PM
request info from mr. numberdummy
 
I'm in need of a right hand (passenger side) spindle for my 1960 F100 2WD. There is one listed on Ebay with as B7C3105A, can you confirm that is the correct part? Thank you in advance.

Also if any of you gentleman may have one, or can help me locate one I would greatly appreciate it.

Jim

ibuzzard 09-15-2012 08:42 PM
The "Dummy" knows all.He'll be around in a minute to help......

NumberDummy 09-16-2012 02:26 AM
Originally Posted by ibuzzard (Post 12274998)
The "Dammy" knows all.
:-missingt Forget something?!

B7C-3105-A .. Spindle-Right/Left is the same / Obsolete / 1957/58 F100/250 / 1959/60 F100/250 2WD

NOS PARTS SOURCE in Olathe KS has ONE = 913-220-5746.

Lotta junkyards on Branson St. in Sun Valley, including a pick-n-pull that used to be Aadland Brothers Auto Wrecking.

ibuzzard 09-16-2012 02:37 AM
Originally Posted by NumberDummy (Post 12275769)
:-missingt Forget something?!
Si, Senor.

hiball3985 09-16-2012 12:43 PM
Originally Posted by NumberDummy (Post 12275769)
:-missingt Forget something?!

B7C-3105-A .. Spindle-Right/Left is the same / Obsolete / 1957/58 F100/250 / 1959/60 F100/250 2WD

NOS PARTS SOURCE in Olathe KS has ONE = 913-220-5746.

Lotta junkyards on Branson St. in Sun Valley, including a pick-n-pull, that used to be Aadland Brothers Auto Wrecking.
I thank you Sir :). I haven't been to the junkyards in quite some time, but there wasn't much left the last time I went, I will check again. I will check NOS PARTS SOURCE also.

Jim


All times are GMT -5. The time now is 07:32 AM.


© 2024 MH Sub I, LLC dba Internet Brands