Yo ice T and clay,love the tips
 

Got me 6" tips today,boy are they nice looking peice of gear,love the roll work,top job,cant wait to see how these baby's look.
And the clock is gunna look good on the work shop wall :)

Thanks clay..
http://i794.photobucket.com/albums/y...2/DSCF1207.jpg

Ice T's message on the parcel made me and lyn laugh,we saving dollar by dollar,cant wait too visit you 2 and jamie and the US of A...

Got one of those tips on my truck.

A friend of mine asked if I had to check that no vagrant is sleeping in there before I started it, the exhaust is so big! ;)

Now I just need the 4" MRBP exhaust to connect the turbo to the tip.

Almost finished my new exhaust system.

Figured you were doing something constructive like that to order 2 vagrant's sleeping holes.

Be sure to post up some pics when you are done.

My helpers
http://i794.photobucket.com/albums/y...2/DSCF1208.jpg
Where do i start
http://i794.photobucket.com/albums/y...2/DSCF1209.jpg
Farked up,did the cut wrong,SO i had to fill weld it.
http://i794.photobucket.com/albums/y...2/DSCF1210.jpg
Y pipe done,also didnt like the gap so i modified the gap,then filled the gap.
http://i794.photobucket.com/albums/y...2/DSCF1211.jpg
Y pipe done ????
http://i794.photobucket.com/albums/y...2/DSCF1212.jpg
Tips were not were i wanted them,so chopped up Y pipe and re done it.
http://i794.photobucket.com/albums/y...2/DSCF1213.jpg
Fark it,that will do
http://i794.photobucket.com/albums/y...2/DSCF1215.jpg
http://i794.photobucket.com/albums/y...2/DSCF1219.jpg
http://i794.photobucket.com/albums/y...2/DSCF1218.jpg
http://i794.photobucket.com/albums/y...2/DSCF1217.jpg
http://i794.photobucket.com/albums/y...2/DSCF1216.jpg
Sounds heaps better ,and because the noise is way out back i can here my engine a lot more,i like it. :-X22

Nice job! Where's the spare going to go?

Also, very cunning build! Any vagrants trying to sleep in those big tips will slip out due to the downward slope.

And, you got a nice set of pea*****!

Inta fekkin back..

Actually im thinking of making a spare wheel spider rack for my rollbar :D

Next project.

I don't like the look of those, too high etc.

Maybe a space saver - hehe just kidding ;)

Think you've gotta be a bit more bendy with your Y pipe. Like make it more of a T and go around the spare. As it's 1 pipe splitting into 2 pipes the same diameter the gas has got twice the volume to flow into so, in theory at least, making your Y more angular shouldn't impact performance.

Spider mounts don't do much to keep the weight & centre of gravity low. Only seen one on a bit of a show truck - it had the raising side steps etc. It looked like a Paris-Dakar wanna be with no visibility out of the rear window and the cargo space severely compromised. Also the 'sports' bar on these trucks are usually only held on to the top cap of the tray by 4 bolts. I wouldn't be surprised if the weight of a spare wheel on a spider mount to the sports bar started to rip off somewhere.

Anyway carrying your spare underneath,is bad when your in the bush.

That looks really nice. I am impressed how evenly it came out. Great job!

LOL thanks clay..

As you'd know when you do a angle cut,you only have to be 1/4" out and where the tip is its miles :'(.
Took me 2 shots to get it where it is clay,got it in the end.

Oh and got Ice T's message about the extra package
Thank You :-X22.

hows those circlip pliers working out :-X22

Great job m8 they look sweeeet. how does she sound ?????

In the cockpit its quieter,i can here the engine a lot more,i like it. :D

Awesome, I was worried it might not have made it.

Pliers have already come in handy several times. Thanks so much.