Whats the price on tem

Price is listed at top of each page, $85. All sold and don't know when I'll find more. Factory new 19.5s are described a few postings back, and factory new 19.5s and 22.5s are being discussed in this current thread. Stu

https://www.ford-trucks.com/forums/1...-straight.html

Hi,
Just wanted to ask if you still had the rims, also do you know if they will fit an International Metro Aluminum 1500?

I do not have an available set. But I did text my friend Josh Madsen, and he has an available set. I hesitate to post his email or phone number here, so would suggest you go down the ad page a few lines to find an ad of Josh's. If you reply there he will see it and respond. Thanks.

An IHC Metro should have the same 5 lug x 8" pattern. Most likely you now have 17" split ring type wheels. Probably Budd 59340 or 66520. Stu

Thanks for the reply. I am new when it comes to forums, not sure where to look for the "ad"page" to find Josh.

Thank you again for your help

Here's his current ad.

https://www.ford-trucks.com/forums/1...ix-runner.html

I'll also text Josh and see if he can drop by my ad to reply. Stu

I sent you an email.
Thanks
Josh

Thanks Stu for the referral. I sent an email to jozebrow and my phone number is in the ad you linked.

Im always good for clearing out more space.

Never mind....

Stu, have 4 like new alloy 5on8" 19.5 budd wheels, two front, two rear.
Also have the two steel inner rear wheels for sale.
Comes with two as new 8x19.5 tires and two 80% used tires. In Salem Oregon 503 559 5780

Oh yes, I know. I saw your CL ad and did the below forum posting to let guys know. I have no need for them myself, but hope you find them a good new home. If you don't sell them please let me know. I'll dig through old contacts to see if I can resurrect emails from guys looking for them. Stu

https://www.ford-trucks.com/forums/1...x-8-on-cl.html

I am looking for 8.25 x 20 6 bolt stud centered w/locking ring Budd rims that were used on the 75-79 F60 series truck to fit my 56 Chevy C6500 grain truck. Any help locating these would be greatly appreciated.

Haven't heard of any for a while. Will come back here to comment if a set surfaces. Stu

Edit - forgot this thread. There is a mix of designs so you'd have to avoid the widow makers. Stu

https://www.ford-trucks.com/forums/1...dd-wheels.html

I learn that Josh Madsen has a few of the 20", 6 x 8.75", pattern. You can find him earlier in this thread. Stu

Thanks Stu.
Yes i knew i had 3 and today confirmed that i have four more. (total of 7)
If anyone needs them they can send me an email to jfmadsen at yahoo do t com

Hope its ok im posting in your ad! :) :-X19. I'll send a commision check when they sell.... :-drink
Thanks

It's all good. This old thread has a life of its own I think. Stu